OBD code P0096 indicates an issue with the Intake Air Temperature 2 (IAT2) Sensor circuit.
Symptoms include the Engine Light being ON.
The cause could be a faulty sensor, open/shorted harness, or poor electrical connection.
This is a moderate issue that may affect engine performance.
To fix, inspect the sensor, wiring harness, and connectors for any damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the p0096 OBD Code
The vehicle may experience difficulty starting or poor engine performance with fault code P0096.
- With OBD code P0096, the Engine Light may illuminate.
- Reduced engine power may be experienced.
- The vehicle may have difficulty starting.
- The engine may run rough or stall.
- Fuel efficiency may decrease.
Causes of the p0096 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
P0096 code typically indicates a fault related to the intake air temperature sensor circuit.
- P0096 can be caused by a Faulty Intake Air Temperature 2 (IAT2) Sensor.
- An open or shorted Intake Air Temperature 2 Sensor harness.
- A poor electrical connection in the Intake Air Temperature 2 Sensor circuit.
Fixing Error Code p0096 Step By Step
Address the intake air temperature sensor circuit low voltage issue indicated by fault code P0096.
- To fix OBDII code P0096, start by reviewing the possible causes mentioned above and visually examining the corresponding wiring harness and connectors.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, verify the operation of the intake air temperature (IAT) sensor and replace it if necessary.
- Clear the fault codes from the vehicle’s computer using a scan tool.
- Finally, perform a test drive to ensure the code does not return, indicating a successful repair.
Cost Of Fixing p0096 Fault Code
Diagnosing and repairing fault code P0096 typically involves inspecting and testing the intake air temperature sensor.
The cost to diagnose and fix OBD code P0096 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Actual cost may vary based on shop rates and the complexity of the repair.
Details of the p0096 OBD Code
P0096 indicates an intake air temperature sensor 2 circuit range/performance problem.
OBD code P0096 means that the intake air temperature sensor 2 circuit range/performance problem has been detected.
This code is triggered by the Engine Control Module (ECM) when it detects that the intake air temperature sensor 2 signal is not within the expected range or is not performing as it should.
The intake air temperature sensor 2 is typically located in the air intake system after the air filter and measures the temperature of the incoming air to help the ECM adjust the airfuel mixture for optimal combustion.
Mechanic’s Tech Notes
Code P0096 indicates an issue with the intake air temperature sensor 2 circuit range/performance.
OBDII code P0096 indicates an issue with the intake air temperature sensor 2 circuit.
To diagnose, use a multimeter to check the sensor’s resistance and compare it to specifications.
Inspect the sensor and its wiring for any damage or corrosion.
Verify sensor data using a scan tool and ensure it responds correctly.
If the sensor and wiring are fine, the fault may lie in the PCM.
Reflashing the PCM might be necessary to resolve the issue.
FAQ
Common symptoms of OBD code P0096 include Engine Light ON, caused by a faulty Intake Air Temperature 2 (IAT2) sensor or related wiring issues. Fix: Inspect and repair wiring/connectors.
Possible causes of OBD code P0096 include a faulty Intake Air Temperature 2 (IAT2) sensor, open/shorted sensor harness, or poor electrical connection. Inspect and repair as needed.
Diagnose and fix OBD code P0096 by checking the Intake Air Temperature 2 (IAT2) sensor, its harness, and connectors for faults. Repair or replace damaged components as needed.
Wrap Up
If your check engine light is on and your vehicle is experiencing difficulty starting, stalling, or rough idling, it could be due to OBDII code P0096. This code typically indicates an issue with the intake air temperature sensor 2 circuit, which may be caused by a faulty sensor, damaged wiring, or poor electrical connections.
To address OBDII code P0096, start by inspecting the wiring harness and connectors associated with the intake air temperature sensor 2. Look for any signs of damage, corrosion, or loose connections.
Test the sensor itself for proper operation and replace
