OBD code P0016 indicates a crankshaft positioncamshaft position correlation error in the engine.
It affects the Intake Camshaft Position Sensor and Crankshaft Position Sensor.
Symptoms include the Engine Light ON, hard starting, and stalling.
Causes can be low oil level, timing chain issues, blocked oil passages, or faulty sensors.
This issue is serious as it can lead to engine damage.
A possible fix involves checking and repairing wiring harnesses, connectors, and sensor components.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the p0016 OBD Code
The engine may run poorly or have difficulty starting with fault code P0016.
- With OBD code P0016, the Engine Light will be ON.
- Engine may be hard to start.
- Engine may stall while driving.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Causes of the p0016 OBD Code
P0016 code typically indicates a misalignment between the crankshaft and camshaft position sensors.
- P0016 can be caused by low oil level.
- A mechanical timing fault such as a stretched timing chain or damaged timing chain tensioner.
- A blocked oil passage.
- A faulty Intake (‘A’) Camshaft Position (CMP) Sensor.
- A faulty Crankshaft Position (CKP) Sensor.
Fixing Error Code p0016 Step By Step
To resolve fault code P0016, address the timing chain or belt alignment issue.
- To fix OBDII code P0016, first, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the timing belt or chain for proper alignment and tension.
- Verify that the camshaft and crankshaft sensors are functioning correctly.
- If necessary, replace the camshaft or crankshaft position sensors.
- Finally, reset the fault codes and perform a road test to confirm the repair.
Cost Of Fixing p0016 Fault Code
Diagnosing and repairing fault code P0016 typically involves inspecting and possibly replacing the camshaft position sensor.
The cost to diagnose and fix OBD code P0016 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
Costs depend on labor rates, shop fees, and the complexity of the repair.
Details of the p0016 OBD Code
P0016 code indicates a crankshaft positioncamshaft position correlation problem in the engine.
OBD code P0016 means that the ECM has detected a misalignment between the crankshaft position sensor and the camshaft position sensor.
This code is triggered when the correlation between the two sensors is outside the normal operating range.
The signal or system involved in this fault code is the camshaft and crankshaft position sensors, which are responsible for ensuring proper timing and synchronization of engine components.
Mechanic’s Tech Notes
Code P0016 indicates a camshaft position sensor correlation problem between the camshaft and crankshaft.
OBDII code P0016 indicates a camshaft/crankshaft position correlation problem.
To diagnose, use a scan tool to monitor camshaft and crankshaft sensor data for proper synchronization.
Check sensor wiring for damage or poor connections.
Use a voltmeter to test sensor circuits for proper voltage and ground.
Inspect timing chain/belt for wear or misalignment.
Perform a crankshaft position variation relearn procedure if necessary.
If all checks out, consider a faulty camshaft or crankshaft sensor.
FAQ
Common symptoms of OBD code P0016 include Engine Light ON, hard starting, stalling while driving. Causes may include low oil, timing faults, sensor issues. Fix: Inspect wiring and connectors.
OBD code P0016 is typically caused by a mechanical timing fault like a stretched timing chain or damaged tensioner. Check wiring harness and connectors for damage.
Diagnose and repair OBD code P0016 by checking for low oil level, mechanical timing faults, blocked oil passages, and faulty camshaft or crankshaft position sensors.
Wrap Up
If your check engine light is on and you’re experiencing engine misfires or rough idling, OBDII code P0016 may indicate a camshaft position sensor correlation problem.
This could be caused by faulty camshaft or crankshaft position sensors, incorrect timing belt installation, or issues with the timing chain.
To address OBDII code P0016, start by inspecting the camshaft and crankshaft position sensors for proper operation and alignment.
Check the timing belt or timing chain for correct installation and tension.
Ensure the wiring harness and connectors related to the sensors are secure and free of damage or
