[SOLVED] P085E Code: Fixing Gear Shift Control Module ‘b’ Performance Issue

The automobile fault code P085E indicates a problem with the Gear Shift Control Module ‘B’. This can be identified by the Engine Light or Service Engine Soon Warning Light being illuminated. The cause of this fault code could be a faulty module, an open or shorted harness, or a poor electrical connection in the module’s circuit.

To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this problem is estimated to be around 1.0 hour. To interpret the fault code, check the “Possible Causes” mentioned above and perform the necessary inspections and repairs.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p085e fault code.

  • The symptoms of the automobile fault code p085e include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p085e can be caused by a faulty Gear Shift Control Module ‘B’, an open or shorted harness, or a poor electrical connection in the circuit.

  • The fault code p085e can be caused by the following: a faulty Gear Shift Control Module ‘B’, an open or shorted harness in the Gear Shift Control Module ‘B’, and a poor electrical connection in the Gear Shift Control Module ‘B’ circuit.

To fix the automobile fault code p085e, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p085e, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • The estimated repair time for this fix is 1.0 hour.

The factors influencing the diagnosis and fixing cost of the automobile fault code p085e are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p085e fault code.

The P085E fault code refers to a problem with the Gear Shift Control Module ‘B’ performance.

This code is set by the Engine Control Module (ECM) when there is an issue with communication between the ECM and the Gear Shift Control Module. The ECM monitors the Gear Shift Control Module to ensure proper functioning, and if there is a problem with this communication, the P085E code is triggered.

It is important to address this issue promptly to ensure smooth gear shifting and overall vehicle performance.

What are the possible causes of the automobile fault code p085e?

If you see the engine light or service engine soon warning light on, the fault code P085E could be the culprit. This code is often caused by a faulty gear shift control module ‘B’, an open or shorted harness for the module, or a poor electrical connection in the module’s circuit. To fix this issue, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Also, look out for broken, bent, pushed out, or corroded pins in the connectors.

How can I visually inspect the wiring harness and connectors related to the Gear Shift Control Module ‘B’?

If you’re dealing with an illuminated Engine Light or Service Engine Soon Warning Light, the culprit could be a faulty Gear Shift Control Module ‘B’. To tackle this issue, start by visually inspecting the wiring harness and connectors associated with the module. Look out for any damaged components and check for broken, bent, pushed out, or corroded pins on the connectors. This thorough examination will help you identify any open or shorted circuits or poor electrical connections. Don’t forget to refer to the “Possible Causes” mentioned earlier for further guidance.

What should I look for when checking for damaged components or broken, bent, pushed out, or corroded connector’s pins?

When troubleshooting an engine light or service engine soon warning light, it’s important to check for damaged components or broken, bent, pushed out, or corroded connector’s pins. These issues can cause a faulty gear shift control module ‘B’, an open or shorted harness, or a poor electrical connection in the gear shift control module ‘B’ circuit. To fix the problem, visually inspect the related wiring harness and connectors, paying close attention to any signs of damage or corrosion.

p085e error fault code explained

If your engine light is on and you’re seeing the P085E fault code, it could be due to a faulty Gear Shift Control Module ‘B’, an open or shorted harness, or a poor electrical connection.

To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.

Scroll to Top