The OBD code P0132 for Nissan indicates a fault with the Front Heated Oxygen Sensor Bank 1. Symptoms include the Engine Light ON, high fuel consumption, and excessive exhaust smoke.
Causes may include a faulty sensor, wiring issues, fuel pressure problems, or intake/exhaust leaks.
This issue should be addressed promptly to prevent further damage.
A possible fix involves inspecting and repairing the sensor, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 6.67 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
Symptoms of the Nissan p0132 OBD Code
The vehicle may exhibit poor fuel economy and lack of power with fault code P0132.
- With Nissan OBD code P0132, the Engine Light will be ON.
- High Fuel Consumption can be noticed.
- Excessive Smoke from Exhaust may be present.
Causes of the Nissan p0132 OBD Code
Possible reasons for Nissan fault code P0132 include issues with the oxygen sensor or its wiring.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- P0132 can be caused by a Faulty Front Heated Oxygen Sensor Bank 1.
- A Front Heated Oxygen Sensor Bank 1 harness that is open or shorted.
- A Front Heated Oxygen Sensor Bank 1 circuit with poor electrical connection.
- Inappropriate fuel pressure.
- Faulty fuel injectors.
- Intake air leaks that may be faulty.
- Exhaust gas leaks.
Fixing Nissan Error Code p0132 Step By Step
Replace faulty front oxygen sensor on Nissan with fault code P0132.
- To fix the Nissan OBDII code P0132, start by reviewing the possible causes mentioned above.
- Visually examine the corresponding wiring harness and connectors for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- If any issues are found, repair or replace the damaged components as necessary.
- Clear the fault code from the vehicle’s computer using a scan tool.
- Finally, test drive the vehicle to ensure the code does not return, indicating a successful repair.
Cost Of Fixing Nissan p0132 Fault Code
The repair for Nissan P0132 involves diagnosing and replacing the faulty oxygen sensor.
The cost to diagnose and fix the Nissan OBD code P0132 typically ranges from $75 to $150, based on a 1. 0hour repair time.
Factors like shop rates and complexity can influence the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Nissan p0132 OBD Code
Nissan P0132 indicates a fault in the oxygen sensor circuit high voltage for bank 1 sensor 1.
OBD code P0132 for Nissan vehicles indicates an issue with the upstream oxygen sensor circuit high voltage.
This code is triggered by the Engine Control Module (ECM) when it detects a voltage higher than normal from the upstream oxygen sensor in bank 1, which is located before the catalytic converter.
The ECM uses this sensor to monitor the oxygen content in the exhaust gases, helping to adjust the airfuel mixture for optimal combustion.
When the voltage output from the sensor remains too high for too long, it triggers the P0132 trouble code.
This can lead to drivability issues and increased emissions.
Mechanic’s Tech Notes
For Nissan code P0132, the oxygen sensor voltage is too high for too long.
To diagnose and fix OBDII code P0132 on a Nissan, start by using a voltmeter to test the oxygen sensor’s voltage signal.
Ensure the sensor is getting power and ground.
Check for any exhaust leaks that could be affecting sensor readings.
If the sensor and wiring look good, consider replacing the oxygen sensor.
Additionally, scan tools can help monitor sensor data and confirm proper operation.
Resetting the fault code after any repairs is essential to verify if the issue has been resolved.
FAQ
OBD code P0132 in a Nissan means the Front Heated Oxygen Sensor Bank 1 is faulty. Check sensor, wiring, fuel pressure, injectors, and intake/exhaust leaks.
Common causes of OBD code P0132 in a Nissan include a faulty front heated oxygen sensor Bank 1, open/shorted sensor harness, poor electrical connection, or inappropriate fuel pressure.
Diagnose P0132 in Nissan: Check Front Heated Oxygen Sensor Bank 1 and related wiring for faults. Inspect connectors for damage or corrosion. Fix as needed.
Wrap Up
If your Nissan is displaying OBD code P0132, you may experience poor fuel economy, rough idling, or a noticeable decrease in engine performance.
This code typically indicates an issue with the oxygen sensor circuit on bank 1 sensor 1, possibly caused by a faulty oxygen sensor, damaged wiring, or a poor electrical connection.
To address Nissan OBD code P0132, start by inspecting the wiring harness and connectors leading to the bank 1 sensor 1 oxygen sensor.
Check for any signs of damage, corrosion, or loose connections.
If no issues are found with the wiring,
