[SOLVED] P2695 Code: Fixing Cylinder 10 Injector Compatibility Issues

The P2695 automobile fault code is related to the program injector and can cause a range of symptoms, including engine misfires, rough idling, and decreased fuel efficiency. The cause of this fault code is typically a malfunctioning program injector. It is important to address this issue promptly as it can lead to further damage to the engine.

The repair process involves visually inspecting the wiring harness and connectors for any damage or corrosion. The difficulty level of this repair is moderate, and it can take up to 1.0 hour to complete.

To interpret the fault code, a diagnostic tool is required to read the code and determine the underlying issue.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

Here are some common symptoms of the automobile fault code P2695:

  • The P2695 fault code indicates a problem with the transmission control circuit.
  • Symptoms of this fault code include: – Illuminated check engine light – Harsh shifting – Transmission slipping – Reduced fuel efficiency – Stalling or hesitation during acceleration – Inability to shift gears – Transmission overheating – Reduced engine power – Transmission going into limp mode.

The automobile fault code P2695 can be caused by various issues related to the program injector, including the following:

  • The P2695 automobile fault code can be caused by a faulty program injector.
  • This can be due to a malfunctioning fuel injector driver circuit, a damaged fuel injector, or a clogged fuel injector.
  • Other possible causes include a faulty powertrain control module (PCM), a damaged wiring harness, or a malfunctioning fuel pressure regulator.
  • It can also be caused by a vacuum leak, a faulty fuel pump, or a malfunctioning fuel system.
  • Additionally, a dirty or clogged air filter, a faulty oxygen sensor, or a damaged catalytic converter can also trigger the P2695 fault code.

Below are the possible fixes for the automobile fault code p2695, including inspecting wiring harness and connectors for damage.

  • To fix the automobile fault code P2695, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The automobile fault code P2695 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour. Therefore, the total cost of diagnosis and fixing the P2695 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time required to fix the issue.

The P2695 fault code is a common issue that triggers the engine light to turn on. This warning light is also known as the Service Engine Soon Warning Light.

The P2695 code indicates a problem with the transmission control module (TCM) or the engine control module (ECM). If this fault code is not addressed promptly, it can lead to serious transmission problems, such as slipping gears or difficulty shifting.

It is important to have a professional mechanic diagnose and repair the issue as soon as possible to prevent further damage to your vehicle.

What are the possible causes of the P2695 automobile fault code?

The P2695 fault code in automobiles is usually caused by a faulty Program Injector. The symptoms of this fault code are not specified. To fix this issue, one should check the possible causes listed above and visually inspect the related wiring harness and connectors. It is important to check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

How can one visually inspect the related wiring harness and connectors to fix the P2695 fault code?

To fix the P2695 fault code caused by a faulty Program Injector, one should visually inspect the related wiring harness and connectors. This involves checking for damaged components and looking for broken, bent, pushed out, or corroded connector’s pins. It is important to thoroughly examine the wiring harness and connectors to ensure that all potential issues are identified and addressed.

What are the steps to take if one finds broken, bent, pushed out, or corroded connector’s pins while fixing the P2695 fault code?

If you encounter broken, bent, pushed out, or corroded connector’s pins while fixing the P2695 fault code, follow these steps: First, visually inspect the related wiring harness and connectors. Then, check for damaged components and look for any broken, bent, pushed out, or corroded connector’s pins. If you find any, replace or repair them as necessary. Finally, check the “Possible Causes” listed above and ensure that the program injector is functioning properly.

p2695 error fault code explained

If you’re experiencing issues with your vehicle’s Program Injector, check the “Possible Causes” listed above.

Inspect the wiring harness and connectors for any damage or corrosion.

Look for broken, bent, or pushed out connector pins.

Take action to fix any issues found.

Scroll to Top