The OBD code P2016 for Hyundai indicates an issue with the Variable Charge Motion Actuator (VCMA).
Symptoms include the Engine Light being ON.
This code is caused by a faulty VCMA, open or shorted VCMA harness, or poor electrical connection.
It is essential to visually inspect the wiring harness, connectors, and components for damage or corrosion.
This issue should be addressed promptly to prevent further complications.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Hyundai p2016 OBD Code
The Hyundai P2016 fault code typically triggers when there is an issue with the intake manifold runner control circuit.
- Symptoms: Engine Light ON.
- Reduced engine power.
- Rough idle.
- Engine stalling.
Causes of the Hyundai p2016 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
P2016 in Hyundai indicates a problem with the intake manifold runner control circuit low.
- P2016 can be caused by a faulty Variable Charge Motion Actuator (VCMA).
- A Variable Charge Motion Actuator (VCMA) harness that is open or shorted.
- A Variable Charge Motion Actuator (VCMA) circuit with poor electrical connection.
Fixing Hyundai Error Code p2016 Step By Step
Address the intake manifold runner control circuit low bank 1 issue on a Hyundai with code P2016.
- To fix Hyundai OBDII code p2016, start by reviewing the possible causes and visually inspecting the wiring harness and connectors for any damage.
- Check the connector pins for any signs of being broken, bent, pushed out, or corroded.
- Clean the throttle body and idle air control valve to ensure they are free from carbon buildup.
- Inspect the intake manifold for any leaks or damage that could affect airflow.
- Reset the engine control module (ECM) to clear the code and see if it returns.
- If the code persists, consider replacing the throttle body assembly if necessary.
Cost Of Fixing Hyundai p2016 Fault Code
Diagnosing and repairing Hyundai fault code P2016 typically involves inspecting and servicing the intake manifold runner control system.
The cost to diagnose and fix a Hyundai OBD code P2016 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
The final cost depends on labor rates, shop fees, and the complexity of the repair needed.
Details of the Hyundai p2016 OBD Code
P2016 in Hyundai indicates an issue with the intake manifold runner control circuit low.
OBD code P2016 for Hyundai vehicles indicates an issue with the Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 1. This code is triggered by the Engine Control Module (ECM) when it detects a low voltage signal from the intake manifold runner position sensor or switch in bank 1. The intake manifold runner position sensor/switch is responsible for monitoring the position of the intake manifold runner flap, which helps optimize airflow into the engine for better performance and efficiency.
When the ECM receives a low voltage signal from this sensor/switch, it triggers the P2016 fault code to indicate a potential problem with the intake manifold runner system on bank 1 of the engine.
Mechanic’s Tech Notes
Detailed information on diagnosing and repairing Hyundai fault code P2016 is provided below.
To diagnose Hyundai OBDII code P2016, start by visually inspecting the wiring harness and connectors related to the intake manifold runner control system.
Look for any damaged components or corroded pins.
Use a multimeter to check for proper voltage and continuity in the circuit.
Additionally, scan the Transmission Control Module (TCM) using a scan tool to ensure it communicates over the Controller Area Network (CAN) network.
If necessary, consider reprogramming or reflashing the TCM to address the issue.
FAQ
OBD code P2016 in a Hyundai is commonly caused by a faulty Variable Charge Motion Actuator (VCMA), open/shorted harness, or poor electrical connection.
Diagnose and fix OBD code P2016 in your Hyundai by checking VCMA and its harness for faults. Inspect wiring, connectors, and pins for damage or corrosion.
It is not safe to continue driving with OBD code P2016 in a Hyundai. Check VCMA and related wiring for faults to prevent engine issues.
Wrap Up
If your Hyundai is displaying OBD code p2016, you may experience rough idling, poor acceleration, or stalling.
This code typically indicates an issue with the intake manifold runner control system, such as a stuck intake manifold runner control valve, faulty sensor, or wiring problem.
To address Hyundai OBD code p2016, start by inspecting the intake manifold runner control valve and sensor for any signs of damage or sticking.
Check the wiring harness for any breaks, shorts, or loose connections.
Replace any faulty components and ensure proper connection to resolve the issue.
