The OBD code P0017 for Hyundai indicates a camshaft position correlation error between the crankshaft and exhaust camshaft.
This affects the engine’s timing system.
Symptoms include the Check Engine light being illuminated.
Causes can include dirty oil, engine mechanical issues, or incorrectly set camshaft timing.
It is a moderate issue that should be addressed promptly.
A possible fix involves inspecting the wiring harness, connectors, and components for any damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Hyundai p0017 OBD Code
The vehicle may exhibit rough idling, poor acceleration, or stalling with Hyundai P0017 fault code.
- Symptoms: Engine Light ON.
- Rough idling.
- Engine stalling.
- Loss of power.
- Increased fuel consumption.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Causes of the Hyundai p0017 OBD Code
The fault code P0017 on a Hyundai is typically triggered by a camshaft position sensor issue.
- P0017 can be caused by dirty oil.
- Engine mechanical problems.
- Camshaft timing incorrectly set.
- Faulty camshaft position sensor.
- Broken camshaft position sensor connector.
- Low voltage to the camshaft position sensor.
- Corroded grounds affecting the camshaft position sensor.
- Signal loss between the camshaft position sensor and the ECM.
Fixing Hyundai Error Code p0017 Step By Step
Address Hyundai P0017 by inspecting and potentially replacing the camshaft position sensor or adjusting the timing chain.
- To fix the Hyundai OBDII code P0017, first, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the engine oil level and condition, ensuring it is clean and at the correct level.
- Then, inspect the camshaft position sensor and crankshaft position sensor for proper operation and replace if necessary.
- Finally, perform a relearn procedure for the camshaft and crankshaft positions using a scan tool to reset the system and clear the fault code.
Cost Of Fixing Hyundai p0017 Fault Code
The repair for Hyundai P0017 involves diagnosing and fixing a camshaft position correlation error.
The cost to diagnose and fix a Hyundai OBD code P0017 typically ranges from $75 to $150, based on a labor time estimate of 1. 0 hour.
Factors like shop rates and the complexity of the repair can influence the final cost.
Details of the Hyundai p0017 OBD Code
Hyundai fault code P0017 indicates a crankshaft position camshaft position correlation error.
OBD code P0017 for Hyundai vehicles indicates a Crankshaft Position Camshaft Position Correlation (Bank 1 Sensor B) error.
This means that the correlation between the crankshaft position sensor and the camshaft position sensor in bank 1, sensor B is not within the expected parameters.
The component that triggers this fault code is typically the camshaft position sensor itself.
The camshaft position sensor monitors the position of the camshaft in relation to the crankshaft, and if the correlation between the two is off, the ECM will detect this as a P0017 fault code.
The signal or system involved in this fault code is the synchronization between the crankshaft and camshaft positions.
The ECM uses data from both sensors to ensure that the engine’s timing is correct for optimal performance and emissions.
When the correlation between the two sensors is not within the specified range, the ECM will trigger a P0017 fault code to indicate a timing issue.
Mechanic’s Tech Notes
Detailed information on Hyundai P0017 code, including symptoms, causes, and solutions for efficient diagnosis and repair.
To diagnose and fix OBDII code P0017 on a Hyundai, start by visually inspecting the wiring harness and connectors related to the camshaft position sensor.
Look for any damage or corrosion on the connector pins.
Use a voltmeter to check the sensor’s power and ground connections for proper voltage levels.
Additionally, scan the TCM using a scan tool to ensure it communicates over the CAN network.
If necessary, consider reprogramming the TCM.
These steps can help pinpoint the issue and guide you towards a successful repair.
FAQ
Common causes of OBD code P0017 in a Hyundai: Dirty oil, engine mechanical issues, incorrect camshaft timing. Inspect wiring harness, connectors, damaged components, and connector pins for issues.
Diagnose and fix OBD code P0017 in your Hyundai by checking for dirty oil, engine mechanical issues, or incorrect camshaft timing. Inspect wiring harness and connectors for damage.
It is not safe to continue driving with OBD code P0017. Possible causes include dirty oil, engine issues, or camshaft timing problems. Inspect and repair as needed.
Wrap Up
If your Hyundai is displaying OBD code P0017, you may experience rough idling, poor acceleration, or engine stalling.
This code typically indicates a problem with the camshaft position sensor, crankshaft position sensor, or their wiring.
Issues like incorrect timing due to a stretched timing chain can also trigger this fault code.
To address Hyundai OBD code P0017, start by inspecting the camshaft and crankshaft position sensors for proper operation and connection.
Check the wiring harness for any signs of damage or corrosion, and ensure the timing chain is within specifications.
Replace faulty sensors or repair
