[SOLVED] P16Bf Code: Fix Starter Cut Relay Strly Circuit Malfunction Now!

The automobile fault code P16BF indicates a problem with the Starter Cut Relay. When this fault occurs, the Engine Light or Service Engine Soon Warning Light will illuminate.

The cause of this issue could be a faulty Starter Cut Relay, an open or shorted harness, or a poor electrical connection in the Starter Cut Relay circuit. To fix this problem, you should visually inspect the wiring harness and connectors for any damage. Additionally, check for broken, bent, pushed out, or corroded pins in the connectors.

The repair for this fault may take approximately 1.0 hour.

It is important to address this issue promptly to prevent further damage to your vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to the p16bf fault code.

  • The symptoms of the automobile fault code p16bf include the Engine Light being ON and the Service Engine Soon Warning Light being illuminated.

The automobile fault code p16bf can be caused by a faulty Starter Cut Relay, an open or shorted Starter Cut Relay harness, or a poor electrical connection in the Starter Cut Relay circuit.

  • The fault code p16bf can be caused by a faulty Starter Cut Relay, an open or shorted Starter Cut Relay harness, or a poor electrical connection in the Starter Cut Relay circuit.

To fix the automobile fault code p16bf, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p16bf, follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • The estimated repair time for this fix is 1.0 hour.

The automobile fault code p16bf diagnosis and fixing cost is influenced by the estimated repair time of 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

The P16BF fault code refers to a malfunction in the Starter Cut Relay STRLY Circuit. The Powertrain Control Module (PCM) monitors the signal between the drive command to the starter and the return signal from the starter cut relay.

If these signals do not match for a specific duration, the PCM detects a problem and stores a Diagnostic Trouble Code (DTC). This code indicates an issue with the circuit responsible for controlling the starter cut relay.

It is important to address this fault code promptly to ensure proper functioning of the starter system in your vehicle.

What are the possible causes of the automobile fault code p16bf?

If you see the engine light or service engine soon warning light on, the fault code P16BF could be the culprit. This code is often caused by a faulty starter cut relay, an open or shorted starter cut relay harness, or a poor electrical connection in the starter cut relay circuit. To fix the issue, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Also, look out for broken, bent, pushed out, or corroded pins in the connectors.

How can I visually inspect the wiring harness and connectors to fix the fault code p16bf?

To fix the fault code p16bf, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This can help identify any issues with the Starter Cut Relay or if the harness is open or shorted. By checking these possible causes, you can take the necessary steps to resolve the problem and get your engine light or service engine soon warning light turned off.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p16bf?

When resolving the fault code p16bf, start by checking for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. These issues can cause a poor electrical connection and lead to the engine light being on. By addressing these potential causes, you can effectively fix the problem and ensure optimal performance of your vehicle.

p16bf error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, the p16bf fault code might be the culprit. This code is usually caused by a faulty Starter Cut Relay, an open or shorted Starter Cut Relay harness, or a poor electrical connection in the Starter Cut Relay circuit.

To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.

Scroll to Top