The OBD code P0010 for Hyundai indicates an issue with the Continuously Variable Valve Timing (CVVT) system.
Symptoms include the Engine Light being ON.
Causes may include dirty oil, low engine oil level, faulty CVVT, open/shorted CVVT harness, or poor electrical connection.
This is a moderate issue that can affect engine performance.
To fix, inspect and repair any damaged components or wiring connections related to the CVVT system.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Hyundai p0010 OBD Code
The vehicle may exhibit rough idling, poor acceleration, or stalling with Hyundai P0010 fault code.
- Symptoms: Engine Light ON.
- Rough idle.
- Loss of power.
- Poor fuel economy.
- Engine may make a rattling noise.
Causes of the Hyundai p0010 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
The P0010 code on a Hyundai typically indicates an issue with the camshaft position actuator circuit.
- P0010 can be caused by dirty oil.
- Low engine oil level.
- Faulty Continuously Variable Valve Timing (CVVT).
- Continuously Variable Valve Timing (CVVT) harness is open or shorted.
- Continuously Variable Valve Timing (CVVT) circuit poor electrical connection.
Fixing Hyundai Error Code p0010 Step By Step
Repairing fault code P0010 on a Hyundai involves addressing issues with the intake camshaft position actuator circuit.
- To fix Hyundai OBDII code P0010, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Check the engine oil level and condition, ensuring it is clean and at the correct level.
- Inspect the camshaft position actuator solenoid for proper operation and replace if necessary.
- Clear the fault codes using a scan tool and test drive the vehicle to verify the repair.
- If the code returns, further diagnostics may be needed to pinpoint the exact cause, such as checking the camshaft position sensor or the engine control module.
Cost Of Fixing Hyundai p0010 Fault Code
Diagnosing and repairing Hyundai P0010 involves inspecting and possibly replacing the intake camshaft position actuator solenoid.
The cost to diagnose and fix a Hyundai OBD code P0010 typically ranges from $75 to $150 for labor rates per hour.
With an estimated repair time of 1. 0 hour, the total cost could be around $75 to $150, depending on shop rates and the complexity of the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Hyundai p0010 OBD Code
Hyundai P0010 code indicates an issue with the intake camshaft position actuator circuit.
OBD code P0010 for Hyundai vehicles indicates an issue with the A camshaft position actuator circuit.
This code is triggered by the Engine Control Module (ECM) when it detects a problem with the camshaft position actuator circuit on the intake side of the engine.
The ECM monitors the camshaft position to ensure proper timing and performance.
If there is a fault in the circuit or the actuator itself, the ECM will set code P0010. This code is specifically related to the intake camshaft, and it typically involves issues with the actuator solenoid, wiring, or connectors associated with the camshaft position actuator.
Mechanic’s Tech Notes
Detailed information on Hyundai fault code P0010, including symptoms, causes, and diagnostic steps for resolution.
To diagnose Hyundai OBDII code P0010, start by checking the camshaft position actuator solenoid valve.
Use a multimeter to test for proper voltage and resistance.
Inspect the wiring harness and connectors for any damage or corrosion.
Verify the solenoid’s operation using a scan tool capable of actuation tests.
If the solenoid is functioning correctly, consider checking the engine oil level and quality, as low oil pressure or dirty oil can trigger this code.
If necessary, replace the camshaft position actuator solenoid valve.
FAQ
Common causes of OBD code P0010 in a Hyundai: Dirty oil, low engine oil level, faulty CVVT, open/shorted CVVT harness, poor electrical connection. Inspect wiring harness and connectors for damage.
Diagnose P0010 in Hyundai: Check for dirty oil, low oil level, faulty CVVT, open/shorted CVVT harness, poor electrical connection. Inspect wiring harness/connectors for damage/corrosion.
It is not safe to continue driving with OBD code P0010 in a Hyundai. Check oil level, inspect CVVT components, wiring, and connectors for issues.
Wrap Up
If your Hyundai is displaying OBD code P0010, you may experience rough idling, poor acceleration, or engine stalling.
This code typically indicates a malfunction in the intake camshaft position actuator circuit, possibly caused by a faulty camshaft position sensor, damaged wiring, or low engine oil levels affecting the variable valve timing system.
To address Hyundai OBD code P0010, start by inspecting the wiring harness and connectors related to the intake camshaft position actuator and sensor.
Test the camshaft position sensor for proper operation and replace if necessary.
Ensure the engine oil level meets manufacturer
