The OBD code P1437 for Honda indicates an issue with the Motor Power Inverter (MPI).
Symptoms include the Engine Light being ON.
This fault code can be caused by a faulty MPI, open or shorted MPI harness, or poor electrical connections in the MPI circuit.
It is important to address this issue promptly to prevent further damage.
A possible fix is to inspect the MPI, harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Honda p1437 OBD Code
The vehicle may exhibit poor acceleration and increased fuel consumption with Honda fault code P1437.
- Symptoms: Engine Light ON.
- Reduced engine performance.
- Increased fuel consumption.
Causes of the Honda p1437 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
P1437 in Honda indicates a fault related to the EVAP system purge control solenoid valve circuit.
- P1437 can be caused by a faulty Motor Power Inverter (MPI).
- An open or shorted MPI Harness.
- A poor electrical connection in the MPI circuit.
Fixing Honda Error Code p1437 Step By Step
To resolve Honda fault code P1437, inspect the EVAP bypass solenoid valve for proper operation.
- To fix Honda OBDII code P1437, first, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Check the operation of the EVAP bypass solenoid valve.
- Test the EVAP bypass solenoid valve for proper function.
- Replace the EVAP bypass solenoid valve if it fails testing.
- Clear the fault codes and perform a road test to verify the repair.
Cost Of Fixing Honda p1437 Fault Code
Diagnosing and repairing Honda fault code P1437 may involve inspecting the EVAP system components for faults.
The cost to diagnose and fix Honda OBD code P1437 typically ranges from $75 to $150, based on a 1. 0hour repair time.
Factors like shop rates and complexity can affect the final cost.
Details of the Honda p1437 OBD Code
Code P1437 on a Honda indicates a problem with the EVAP system purge control solenoid valve circuit.
Code P1437 on a Honda vehicle indicates a problem with the evaporative emission control system.
This code specifically points to a fault in the purge control solenoid valve circuit.
The Engine Control Module (ECM) triggers this code when it detects an electrical malfunction in the circuit related to the purge control solenoid valve.
The purge control solenoid valve is part of the evaporative emission control system, which helps to reduce harmful emissions by capturing and storing fuel vapors before they can escape into the atmosphere.
When this valve malfunctions, it can lead to issues with emissions control and may trigger the P1437 trouble code.
Mechanic’s Tech Notes
Detailed information on Honda fault code P1437, including symptoms, causes, and solutions.
To diagnose and fix OBDII code P1437 on a Honda, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If communication issues are detected, reprogramming or reflashing the TCM may be necessary.
Additionally, visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
Addressing these potential issues can help resolve the P1437 fault code.
FAQ
Common symptoms for Honda OBD code P1437 include Engine Light ON. Causes may be Faulty Motor Power Inverter, MPI Harness issues. Fix: Inspect wiring, connectors for damage or corrosion.
The typical root cause of OBD code P1437 in Honda vehicles is a faulty Motor Power Inverter (MPI) or issues with the MPI harness and circuit connections.
To diagnose and repair OBD code P1437 in a Honda vehicle, check for a faulty Motor Power Inverter (MPI), open/shorted MPI harness, or poor electrical connection. Inspect wiring and connectors.
Wrap Up
If your Honda is displaying OBD code P1437, you may experience issues with the EVAP system, such as difficulty starting the vehicle, decreased fuel efficiency, or a strong fuel odor.
This code typically indicates a problem with the EVAP control system purge flow valve circuit.
To address Honda OBD code P1437, start by checking the wiring harness and connectors related to the EVAP purge flow valve.
Ensure there are no loose connections, damaged wires, or corrosion present.
If the wiring appears intact, consider testing the EVAP purge flow valve itself for proper operation or potential replacement.
