The OBD code P2110 for Ford indicates an issue with the Throttle Actuator Control (TAC) system.
Symptoms include the Engine Light being ON.
Common causes are a faulty TAC motor, open or shorted TAC motor harness, poor electrical connection in the TAC motor circuit, or a faulty Powertrain Control Module (PCM).
This is a moderate issue that should be addressed promptly.
To fix it, inspect the wiring harness, connectors, and components for any damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
Symptoms of the Ford p2110 OBD Code
The vehicle may experience a lack of power or acceleration with fault code P2110.
- Symptoms: Engine Light ON.
- Reduced engine power warning light illuminated.
- Vehicle may go into limp mode.
- Engine may not respond to throttle input.
- Vehicle may idle roughly.
Causes of the Ford p2110 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
P2110 in Ford vehicles typically indicates a malfunction in the throttle actuator control system.
- P2110 can be caused by a Faulty Throttle Actuator Control (TAC) Motor.
- A Throttle Actuator Control (TAC) Motor harness that is open or shorted.
- A Throttle Actuator Control (TAC) Motor circuit with poor electrical connection.
- Or a Faulty Powertrain Control Module (PCM).
Fixing Ford Error Code p2110 Step By Step
To address Ford code P2110, inspect the throttle actuator control system for potential issues.
- To fix the Ford OBDII code P2110, start by reviewing the possible causes mentioned above.
- Visually examine the throttle actuator control system wiring harness and connectors for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- If any issues are found, repair or replace the damaged components as necessary.
- Reset the electronic throttle control module to clear the code and see if it returns.
- If the problem persists, consider replacing the throttle actuator control module after verifying that all wiring and connections are in good condition.
Cost Of Fixing Ford p2110 Fault Code
The repair for Ford P2110 typically involves replacing the throttle actuator control system forced limited RPM.
The cost to diagnose and fix Ford OBD code P2110 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
Costs may vary based on shop rates, complexity of the issue, and any additional parts or labor needed for the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Ford p2110 OBD Code
Ford code P2110 relates to an issue with the throttle actuator control system forced limited RPM.
Ford OBD code P2110 means Throttle Actuator Control System Forced Limited RPM.
This code is triggered by the Powertrain Control Module (PCM) when it detects that the throttle actuator control system is limiting the engine RPM.
The throttle actuator control system involves the throttle body, throttle position sensor, and other related components that control the engine’s air intake.
When this code is set, it indicates an issue with the throttle actuator control system that is causing the engine RPM to be limited.
Mechanic’s Tech Notes
Detailed information on Ford code P2110, which relates to the throttle actuator control system forced limited RPM.
To diagnose and fix OBDII code P2110 on a Ford, start by checking the throttle actuator control system.
Use a voltmeter to test the power and ground circuits of the throttle actuator control motor.
Inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, or corroded.
Use a scan tool to monitor the throttle actuator control system’s data and verify proper operation.
If necessary, reflash the powertrain control module (PCM) to address any software issues.
This comprehensive approach will help pinpoint the root cause of the P2110 fault code.
FAQ
Common causes of OBD code P2110 in a Ford vehicle include a faulty Throttle Actuator Control (TAC) Motor, open/shorted TAC motor harness, poor electrical connection, or faulty PCM.
OBD code P2110 in a Ford indicates an issue with the Throttle Actuator Control (TAC) Motor. It’s serious, and it’s not safe to continue driving.
To diagnose and repair OBD code P2110, check for a faulty TAC motor, open/shorted harness, poor electrical connection, or faulty PCM. Inspect wiring and connectors for damage.
Wrap Up
If your Ford is displaying OBD code P2110 and experiencing issues with the throttle actuator control system forced limited RPM, it could be caused by a faulty throttle actuator control system, a stuck open throttle body, or a wiring issue in the throttle actuator control circuit.
To address Ford OBD code P2110, check the throttle body for any obstructions, inspect the wiring harness for damage or loose connections, and test the throttle actuator control system for proper operation.
Consider replacing the throttle body or repairing any damaged wiring as needed.
