The OBD code C1280 for Ford indicates an issue with the Stability Control Sensor Cluster.
Symptoms include the ABS warning light and engine light being illuminated.
This is usually caused by a faulty sensor cluster, wiring harness issues, or poor electrical connections.
It is a moderate issue that should be addressed promptly.
To fix it, inspect the sensor cluster, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Ford c1280 OBD Code
The vehicle displays an ABS warning light on the dashboard with fault code C1280 stored.
- Symptoms for Ford OBD code C1280 may include: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Unusual noises coming from the ABS module.
- In some cases, the vehicle may exhibit erratic braking behavior.
Causes of the Ford c1280 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Ford code C1280 include ABS module issues or faulty wheel speed sensor signals.
- C1280 can be caused by a faulty Stability Control Sensor Cluster.
- A Stability Control Sensor Cluster harness that is open or shorted.
- A Stability Control Sensor Cluster circuit with a poor electrical connection.
Fixing Ford Error Code c1280 Step By Step
Resolve fault code C1280 by inspecting the ABS module for internal faults or wiring issues.
- To fix the Ford OBDII code C1280, start by reviewing the possible causes mentioned above.
- Visually examine the corresponding wiring harness and connectors for any issues.
- Check for damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no visible issues are found, consider resetting the ABS module to see if the code clears.
- If the problem persists, it may be necessary to replace the ABS module with a new one.
Cost Of Fixing Ford c1280 Fault Code
Diagnosing and repairing fault code C1280 on a Ford may involve inspecting the ABS module.
The cost to diagnose and fix Ford OBD code C1280 is typically based on 1. 0 hour of labor, with rates ranging from $75 to $150 per hour.
The total cost will depend on shop rates, complexity of the issue, and any additional parts or services needed.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Ford c1280 OBD Code
Ford code C1280 relates to the ABS pump motor circuit having a malfunction.
Ford OBD code C1280 means that there is a fault detected in the steering sensor circuit.
This code is triggered by the ABS module based on input signals from the steering angle sensor.
The steering angle sensor is responsible for providing data on the steering wheel position and rate of turn to the ABS module for stability control and other safety systems.
When the ABS module detects an issue with the steering sensor circuit, it will set code C1280 and illuminate the ABS warning light on the instrument cluster.
Mechanic’s Tech Notes
For Ford code C1280, check ABS module power and ground circuits for faults.
To diagnose OBDII code C1280 in a Ford, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection can help identify and resolve the issue causing the C1280 fault code.
FAQ
OBD code C1280 in a Ford means an issue with the Stability Control Sensor Cluster. Check wiring harness, connectors, and sensor cluster for faults.
Common symptoms for Ford code C1280 include ABS warning light on, engine light on, caused by faulty stability control sensor cluster. Inspect wiring and connectors for damage.
Diagnose OBD code C1280 in Ford: Symptoms ABS & Engine Light ON. Causes Faulty Stability Control Sensor Cluster. Fix Inspect wiring, connectors, and components for damage.
Wrap Up
If your Ford is displaying OBD code C1280, you may experience issues with the ABS system, such as erratic braking behavior, ABS warning light illumination, or loss of traction control.
This code typically indicates a fault with the brake pressure sensor circuit, faulty sensors, or wiring problems within the ABS module.
To address Ford OBD code C1280, start by inspecting the wiring harness and connectors related to the ABS module.
Check for any damaged wires, loose connections, or corrosion.
Test the brake pressure sensor for proper operation and replace it if necessary.
Ensure all ABS system components are securely
