The OBD code B141C for Ford indicates a fault with the Second Row Passenger Inflatable Seatbelt system.
Symptoms include the Air Bag Warning Light being ON.
This issue is commonly caused by a faulty seatbelt, open/shorted harness, poor electrical connection, or a faulty Restraint Control Module (RCM).
It is a serious concern that requires immediate attention.
To fix it, inspect the seatbelt system components, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Ford b141c OBD Code
The Ford B141C fault code indicates an issue with the driver’s side airbag circuit.
- Symptoms: Air Bag Warning Light ON
Causes of the Ford b141c OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Ford B141C include faulty seat track position sensor or damaged wiring.
- B141C can be caused by a faulty Second Row Passenger Inflatable Seatbelt.
- A Second Row Passenger Inflatable Seatbelt harness that is open or shorted.
- A Second Row Passenger Inflatable Seatbelt circuit with a poor electrical connection.
- A faulty Restraint Control Module (RCM).
Fixing Ford Error Code b141c Step By Step
Address the faulty passenger airbag status indicator by checking the wiring and connections for Ford code B141C.
- To fix the Ford OBDII code B141C, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the code.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no visible issues are found, consider resetting the module that is associated with the code.
- Perform any necessary software updates or reprogramming procedures.
- If the problem persists, consider replacing the module if deemed necessary.
Cost Of Fixing Ford b141c Fault Code
Diagnosing and repairing fault code B141C on a Ford may involve replacing a faulty airbag sensor.
The cost to diagnose and fix Ford OBD code B141C typically ranges from $75 to $150, based on a 1. 0hour repair time.
Factors like shop rates and complexity can affect the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Ford b141c OBD Code
Ford code B141C relates to a faulty solar radiation sensor circuit.
Ford OBD code B141C means Invalid Data Received from Accessory Protocol Interface Module.
This code is triggered by the Accessory Protocol Interface Module (APIM) when it detects invalid data on the network.
The APIM is responsible for communication between various vehicle systems and accessories, such as the audio system, navigation, and climate control.
When the APIM receives data that is not valid or is corrupted, it will set this diagnostic trouble code (DTC) B141C.
This code indicates a communication issue within the vehicle’s network, which may require further diagnosis to identify the root cause of the problem.
Mechanic’s Tech Notes
Detailed information on Ford code B141C, including possible causes and diagnostic steps for resolution.
OBDII code B141C in a Ford typically indicates an issue with the Transmission Control Module (TCM).
To diagnose, check TCM power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
Visually inspect wiring harnesses and connectors for damage, and check connector pins for any signs of being broken, bent, pushed out, or corroded.
If no visible issues are found, consider reprogramming the TCM.
This process may require specialized equipment and software.
FAQ
OBD code B141C in a Ford indicates an issue with the Second Row Passenger Inflatable Seatbelt system. Check wiring, connectors, and components for faults.
Common symptoms of code B141C in a Ford vehicle include the Air Bag Warning Light being ON due to issues with the Second Row Passenger Inflatable Seatbelt system.
Diagnose OBD code B141C in Ford: Air Bag Warning Light ON. Causes: Faulty Second Row Passenger Inflatable Seatbelt, harness issues. Fix: Inspect wiring, connectors for damage, corrosion.
Wrap Up
If your Ford is displaying OBD code b141c and you’re experiencing issues with the airbag system, it could be caused by a faulty passengerside airbag sensor or a problem within the airbag system wiring harness.
To address Ford OBD code b141c, start by inspecting the wiring harness and connectors related to the passengerside airbag sensor.
Look for any signs of damage, corrosion, or loose connections.
If no issues are found, consider testing the passengerside airbag sensor for proper functionality or consulting a professional for further diagnosis.
