The OBD code B1290 for Chrysler indicates an issue with Park Assist Sensor 3. Symptoms include the Engine Light being ON.
Causes may include a faulty sensor, open/shorted harness, poor electrical connection, or a faulty Park Assist Module.
This is a moderate issue.
To fix, inspect the wiring harness and connectors for damage, and check connector pins for any signs of damage.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Chrysler b1290 OBD Code
The specific fault code B1290 in a Chrysler indicates a potential issue with the Occupant Classification Module.
- Symptoms: Service Engine Soon Warning Light may illuminate.
- Intermittent issues with the vehicle’s security system.
- Difficulty starting the vehicle.
Causes of the Chrysler b1290 OBD Code
Possible triggers for Chrysler fault code B1290 include faulty occupant classification module or wiring issues.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- B1290 can be caused by a faulty Park Assist Sensor 3.
- A Park Assist Sensor 3 harness that is open or shorted.
- A Park Assist Sensor 3 circuit with a poor electrical connection.
- Or a faulty Park Assist Module.
Fixing Chrysler Error Code b1290 Step By Step
Address the issue by inspecting the sun sensor circuit for Chrysler fault code B1290.
- To fix Chrysler OBDII code B1290, start by reviewing the possible causes and visually inspecting the wiring harness and connectors.
- Check for any damaged components and examine the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no issues are found with the wiring, consider resetting the module that is associated with the B1290 code.
- Perform a software update on the module if necessary.
- If the problem persists, replace the module with a new one to resolve the B1290 fault code.
Cost Of Fixing Chrysler b1290 Fault Code
Diagnosing and repairing Chrysler fault code B1290 may involve replacing a faulty Occupant Classification Module.
The cost to diagnose and fix Chrysler OBD code B1290 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
Costs depend on shop rates, complexity of the issue, and any additional parts or labor needed for the repair.
Details of the Chrysler b1290 OBD Code
Chrysler fault code B1290 relates to a fault in the ignition switch circuit.
Chrysler OBD code B1290 means Oil Change Indicator Reset Circuit Failure.
This code is triggered by the Body Control Module (BCM) when it detects a malfunction in the circuit responsible for resetting the oil change indicator.
The oil change indicator system is involved in this case, which is responsible for reminding the driver when it’s time to change the engine oil based on driving conditions.
Mechanic’s Tech Notes
Detailed information on Chrysler fault code B1290, including symptoms, causes, and troubleshooting steps.
To diagnose and fix OBDII code Chrysler B1290, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, focusing on broken, bent, or corroded pins.
Ensure all connections are secure.
If the issue persists, consider consulting a professional for further diagnosis and repair.
FAQ
OBD code B1290 in a Chrysler indicates an issue with Park Assist Sensor 3. Check sensor, wiring, and connections for faults to resolve.
Common symptoms of Chrysler OBD code B1290 include Engine Light ON. Possible causes are faulty Park Assist Sensor 3 or related wiring issues. Inspect and repair as needed.
Diagnose and repair OBD code B1290 in a Chrysler: Symptoms include Engine Light ON. Causes may be a faulty Park Assist Sensor 3 or related wiring issues. Check and repair as needed.
Wrap Up
If your Chrysler is displaying OBDII code b1290, you may experience issues with the power door lock circuit.
This could be caused by faulty door lock actuators, damaged wiring, or a malfunctioning body control module.
To address Chrysler OBDII code b1290, start by inspecting the wiring harness for any visible damage or loose connections.
Test the door lock actuators for proper operation and check the body control module for any signs of malfunction.
Replace any faulty components and ensure all connections are secure to resolve the issue.
