The OBD code B1208 for Chrysler indicates a fault with the Vehicle Theft Alarm (VTA) Security Indicator.
This affects the Instrument Cluster (IC) and Body Control Module (BCM).
Symptoms include the Engine Light being ON.
Causes may include a faulty VTA Security Indicator or related wiring issues.
It is not a serious issue but should be addressed.
A possible fix is to inspect and repair any damaged components or wiring connections related to the VTA Security Indicator.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Chrysler b1208 OBD Code
The specific fault code B1208 in a Chrysler indicates an issue with the passenger airbag disable switch.
- Symptoms: Service Engine Soon Warning Light illuminated.
- Possible loss of communication with the airbag control module.
- Steering wheel controls may not function properly.
- Horn may not work.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Causes of the Chrysler b1208 OBD Code
Possible triggers for Chrysler fault code B1208 include issues with the passenger airbag deactivation indicator circuit.
- B1208 can be caused by a faulty VTA Security Indicator.
- A VTA Security Indicator harness that is open or shorted.
- A VTA Security Indicator circuit with a poor electrical connection.
- A faulty Instrument Cluster (IC).
- A faulty Body Control Module (BCM).
Fixing Chrysler Error Code b1208 Step By Step
To address Chrysler fault code B1208, inspect and repair the passenger airbag disable switch circuit.
- To fix Chrysler OBDII code B1208, first, review the ‘Possible Causes’ mentioned above.
- Visually examine the corresponding wiring harness and connectors for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- Repair or replace any damaged components found during the inspection.
- Clear the fault code using a diagnostic scanner.
- Perform a test drive to ensure the code does not return.
Cost Of Fixing Chrysler b1208 Fault Code
Diagnosing and repairing Chrysler fault code B1208 may involve replacing the Occupant Restraint Controller (ORC) module.
The cost to diagnose and fix Chrysler OBD code B1208 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
The final cost depends on shop rates, complexity of the issue, and any additional parts or labor needed for the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Chrysler b1208 OBD Code
Chrysler fault code B1208 relates to a passenger airbag deactivation indicator circuit malfunction.
Chrysler OBD code B1208 indicates a fault in the passenger side airbag circuit low.
This code is triggered by the Occupant Restraint Controller (ORC) module when it detects a low voltage condition in the passenger side airbag circuit.
The ORC module monitors the resistance and voltage levels in the airbag circuits to ensure they are within the specified range for proper deployment in the event of a crash.
When the voltage in the passenger side airbag circuit drops below the threshold, the B1208 code is set, indicating a potential issue with the passenger side airbag system.
Mechanic’s Tech Notes
For Chrysler B1208, refer to detailed information on the specific fault code and its related diagnostics.
OBDII code B1208 in a Chrysler may indicate a fault with the TCM power supply circuit.
To diagnose, use a voltmeter to check TCM power and ground connections for proper voltage levels.
Utilize a scan tool to confirm TCM communication over the CAN network.
Visually inspect wiring harnesses and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
If no visible issues are found, consider reprogramming or reflashing the TCM as a potential fix.
FAQ
OBD code B1208 in a Chrysler indicates an issue with the VTA Security Indicator. Check wiring harness, connectors, and components for damage or corrosion.
Diagnose a B1208 fault code in a Chrysler by checking for a faulty VTA Security Indicator, open/shorted harness, poor connections, faulty IC, or BCM. Inspect wiring and connectors.
Common symptoms of a B1208 fault code in a Chrysler vehicle include the Engine Light ON and possible issues with the VTA Security Indicator circuit.
Wrap Up
If your Chrysler is displaying OBDII code b1208 and your airbag light is illuminated, it may indicate a fault in the passengerside airbag disable switch circuit.
This could be caused by a defective passengerside airbag disable switch, damaged wiring, or poor connections in the circuit.
To address Chrysler OBDII code b1208, start by inspecting the wiring harness and connectors related to the passengerside airbag disable switch.
Check for any visible damage, corrosion, or loose connections.
Test the passengerside airbag disable switch for proper functionality and replace if necessary.
