[SOLVED] Chevrolet U010C Code: Turbocharger Boost Module Communication Issue Solved

The OBD code U010C for Chevrolet indicates a problem with the Turbocharger Vane Position Actuator circuit.

Symptoms include the Engine Light being ON.

This code is usually caused by a faulty actuator, open/shorted harness, or poor electrical connection.

It is a moderate issue that can affect engine performance.

To fix it, inspect the wiring harness, connectors, and actuator for any damage or poor connections.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

The vehicle may experience communication issues between the transmission control module and the engine control module.

  • Symptoms: Engine Light ON.
  • Possible loss of communication with the Transmission Control Module (TCM).
  • Difficulty shifting gears.
  • Rough or erratic shifting patterns.
  • Possible vehicle stalling.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible triggers for Chevrolet U010C include faulty transmission control module, wiring issues, or software glitches.

  • U010C can be caused by a faulty Turbocharger Vane Position Actuator.
  • A Turbocharger Vane Position Actuator harness that is open or shorted.
  • A Turbocharger Vane Position Actuator circuit with poor electrical connection.

Resolve Chevrolet U010C by inspecting and repairing the communication circuit between the PCM and the TCM.

  • To fix U010C OBDII code on a Chevrolet, start by reviewing the possible causes mentioned above.
  • Visually examine the wiring harness and connectors related to the transmission control module (TCM).
  • Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
  • Test the TCM for proper operation and communication.
  • If necessary, reprogram or replace the TCM to resolve the U010C code.

The repair for Chevrolet fault code U010C may involve replacing the transmission control module.

The cost to diagnose and fix Chevrolet OBD code U010C typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.

Costs depend on shop rates, complexity of the issue, and any additional parts or labor needed for the repair.

Chevrolet U010C code indicates a communication problem with the fuel injector control module.

Chevrolet OBD code U010C means Lost Communication with Turbocharger/Supercharger Control Module ‘A’.

This code is triggered when the Engine Control Module (ECM) detects a loss of communication with the turbocharger or supercharger control module.

The signal or system involved is the communication network between the ECM and the turbocharger/supercharger control module.

This code typically indicates a communication issue between these modules, which can be caused by wiring issues, a faulty control module, or a poor connection.

This section provides detailed information on diagnosing and repairing Chevrolet fault code U010C.

To diagnose and fix OBDII code U010C in a Chevrolet, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.

Visually inspect the wiring harness and connectors for any damage, focusing on broken, bent, or corroded pins.

If no visible issues are found, consider reprogramming or reflashing the TCM.

This process may require specialized equipment and software.

1. What does OBD code U010C mean in a Chevrolet vehicle?

OBD code U010C in a Chevrolet indicates an issue with the Turbocharger Vane Position Actuator. Check wiring harness, connectors, and components for faults.

2. How can I diagnose the root cause of code U010C in my Chevrolet?

Diagnose code U010C in Chevrolet by checking Turbocharger Vane Position Actuator and its wiring for faults. Inspect connectors for damage or corrosion.

3. What are the common symptoms associated with OBD code U010C in a Chevrolet vehicle?

Common symptoms of OBD code U010C in a Chevrolet vehicle include Engine Light ON. Possible causes are faulty Turbocharger Vane Position Actuator or related wiring issues. Fix: Inspect and repair wiring connections.

Chevrolet u010c error fault code explained

If your Chevrolet is displaying OBD code U010C along with transmission shifting issues, it may indicate a communication error between the transmission control module (TCM) and the engine control module (ECM).

This could be caused by faulty sensors, damaged wiring harnesses, or a malfunctioning TCM or ECM.

To address Chevrolet OBD code U010C, start by inspecting the wiring harness and connectors between the TCM and ECM for any signs of damage or corrosion.

Test the TCM and ECM for proper communication and functionality.

Replace any faulty sensors or modules as needed to resolve the communication

Scroll to Top