The OBD code P1174 for BMW indicates a Fuel Trim Adaptation Additive Bank 1 Malfunction.
This code affects the fuel system.
Symptoms include the Engine Light being ON.
Common causes are intake leaks, faulty oxygen sensor, or a faulty Mass Air Flow sensor.
It is a moderate issue.
A possible fix is to inspect the intake system for leaks and check the oxygen sensor and MAF sensor for proper operation.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Bmw p1174 OBD Code
The vehicle may experience rough idling and a lack of power under load with fault code BMW P1174.
- Symptoms: Engine Light ON.
- Rough idle may be present.
- Loss of power during acceleration.
- Engine may hesitate or stumble.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Causes of the Bmw p1174 OBD Code
P1174 in BMW indicates a fuel trim imbalance between banks, often due to vacuum leaks or faulty sensors.
- P1174 can be caused by an intake leak.
- A faulty oxygen sensor.
- A faulty Mass Air Flow (MAF) sensor.
Fixing Bmw Error Code p1174 Step By Step
Address the vacuum leak in the intake system to resolve BMW fault code P1174.
- To fix BMW OBDII code P1174, first, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the intake air system for any leaks or restrictions that could cause a lean condition.
- Inspect the fuel system for proper pressure and delivery.
- Consider cleaning or replacing the Mass Air Flow (MAF) sensor if necessary.
- Finally, perform a thorough inspection of the engine for vacuum leaks or exhaust leaks that could contribute to the code.
Cost Of Fixing Bmw p1174 Fault Code
Diagnosing and repairing BMW P1174 typically involves addressing issues with the fuel system.
The cost to diagnose and fix BMW OBD code P1174 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour.
The total cost will vary based on shop rates, complexity of the issue, and any additional parts or services needed.
Details of the Bmw p1174 OBD Code
BMW fault code P1174 relates to fuel trim adaptation additive bank 1 malfunction.
Code P1174 for BMW vehicles indicates a fuel trim adaptation additive bank 1 malfunction.
This means that the engine control module (ECM) has detected that the fuel mixture is too lean or too rich on bank 1 of the engine.
The ECM uses oxygen sensors to monitor the oxygen content in the exhaust gases to adjust the fuel mixture for optimal combustion.
When the ECM detects that the fuel trim is outside of the specified range, it triggers code P1174. This code is related to the fuel system and can be caused by issues such as a vacuum leak, faulty oxygen sensor, fuel pressure regulator problem, or a clogged fuel injector.
Mechanic’s Tech Notes
Detailed information on BMW fault code P1174, including possible causes and diagnostic steps.
OBDII code P1174 in a BMW indicates a fuel trim adaptation additive bank 1 malfunction.
To diagnose, check for vacuum leaks, faulty oxygen sensors, or a dirty mass airflow sensor.
Use a scan tool to monitor fuel trims and oxygen sensor data.
Inspect the intake system for leaks or restrictions.
Check the fuel pressure and injector operation.
Use a voltmeter to test sensor voltages and wiring integrity.
Clear the code after repairs and recheck for any reoccurrence.
FAQ
Common causes of OBD code P1174 in a BMW: intake leak, faulty oxygen sensor, faulty MAF sensor. Fix: visually inspect wiring harness, connectors, damaged components, and connector pins.
Diagnose P1174 in BMW for Engine Light ON. Check for intake leak, faulty Oxygen Sensor, or MAF Sensor. Inspect wiring harness and connectors for damage.
Address the issue promptly. OBD code P1174 on a BMW indicates a fuel trim adaptation additive bank 1 malfunction, potentially caused by intake leak or faulty sensors.
Wrap Up
If your BMW is displaying OBD code P1174, you may experience rough idling, poor acceleration, or decreased fuel efficiency.
This code typically indicates a fuel trim system lean condition, possibly caused by a vacuum leak, faulty oxygen sensor, or a clogged fuel filter.
To address BMW OBD code P1174, start by checking for vacuum leaks in the intake system, testing the oxygen sensor for proper operation, and inspecting the fuel filter for any blockages.
Ensure the wiring harness connections to the oxygen sensor are secure and free of damage.
