OBD code B1267 indicates a communication error between the Engine Control Module (ECM) and other ECUs like the Multi Display ECU, A/C ECU, or Combination Meter ECU.
Symptoms include the Engine Light being ON.
This issue is caused by faulty ECUs or wiring harness issues.
It’s crucial to visually inspect and repair any damaged components or connectors to resolve this problem.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the b1267 OBD Code
The vehicle displays a warning light indicating an issue with the seat track position sensor.
- Symptoms: Service Engine Soon Warning Light ON.
- Possible loss of communication with the keyless entry module.
- Difficulty starting the vehicle.
Causes of the b1267 OBD Code
Possible reasons for fault code B1267 include issues with the seat track position sensor.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- B1267 can be caused by a faulty Engine Control Module (ECM).
- A faulty Multi Display ECU.
- A faulty A/C ECU.
- A faulty Combination Meter ECU.
- The harness being open or shorted between ECUs. An ECU circuit with poor electrical connection.
Fixing Error Code b1267 Step By Step
To address fault code B1267, inspect and repair the circuit for the sun sensor.
- To fix OBDII code B1267, first, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the operation of the door lock switch and actuator.
- Test the door lock switch for proper function and replace if necessary.
- Inspect the wiring going to the door lock actuator for any damage or corrosion.
- Replace the door lock actuator if faulty.
- Clear the fault codes using a scan tool and perform a test drive to verify the repair.
Cost Of Fixing b1267 Fault Code
Diagnosing and repairing fault code B1267 may involve inspecting and replacing faulty seat belt pretensioner circuits.
The cost to diagnose and fix OBD code B1267 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. The final cost may vary based on shop rates and the complexity of the repair.
Details of the b1267 OBD Code
B1267 pertains to a fault in the door ajar switch circuit.
OBD code B1267 means Servo Motor Potentiometer Defrost Circuit Failure.
This code is triggered by the HVAC (Heating, Ventilation, and Air Conditioning) system control module when it detects a malfunction in the defrost circuit of the servo motor potentiometer.
The servo motor potentiometer is a component in the HVAC system that helps control the position of the air blend doors to regulate the temperature and airflow inside the vehicle.
When this circuit fails, it can affect the proper operation of the defrost function in the HVAC system.
Mechanic’s Tech Notes
Code B1267 indicates a failure in the fuel filler door sensor circuit.
OBDII code B1267 indicates an issue with the ambient air temperature sensor circuit.
To diagnose, use a multimeter to test the sensor’s resistance and compare it to specifications.
Check the sensor’s wiring for any damage or corrosion.
Verify sensor data with a scan tool to ensure proper readings.
If the sensor and wiring check out, the fault may lie in the sensor circuit within the TCM.
Reflashing the TCM could resolve the issue.
Remember to clear the code after repairs and recheck to confirm the problem is fixed.
FAQ
OBD code B1267 indicates a fault in Engine Control Module (ECM), Multi Display ECU, A/C ECU, or Combination Meter ECU. Check wiring and connectors for issues.
Common symptoms of OBD code B1267 include Engine Light ON. Possible causes are faulty ECUs or wiring issues. Fix involves inspecting and repairing related components and connections.
Diagnose OBD code B1267 by checking for faulty ECM, Multi Display ECU, A/C ECU, or Combination Meter ECU. Inspect wiring harness and connectors for damage or poor connections.
Wrap Up
If your vehicle is displaying OBD code b1267, you may experience issues with the fuel filler door not opening properly.
This could be caused by a faulty fuel filler door actuator, a damaged wiring harness leading to the actuator, or a malfunction in the control module responsible for operating the fuel filler door.
To address OBD code b1267, start by inspecting the wiring harness connected to the fuel filler door actuator for any signs of damage or corrosion.
Test the actuator for proper functionality and replace it if necessary.
Additionally, check the control module for any faults and address them
