The OBD code B094D indicates a fault with the Left Side Object Detection Indicator in the vehicle’s system.
Symptoms include the Engine Light being ON.
This issue can be caused by a faulty indicator, open/shorted harness, or poor electrical connection.
It is important to address this problem promptly to ensure proper functioning of the detection system.
To fix it, inspect and repair any damaged components or wiring connections related to the Left Side Object Detection Indicator.
| Repair Importance Level | 3.33 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
Symptoms of the b094d OBD Code
The vehicle displays a warning light indicating a fault with the b094d code stored in the system.
- Symptoms: Service Engine Soon Warning Light ON.
- Possible loss of power while driving.
- Engine may run rough or misfire.
- Difficulty starting the engine.
- Vehicle may stall unexpectedly.
Causes of the b094d OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code B094D include faulty seat belt buckle switch or wiring issues.
- B094D can be caused by a faulty Left Side Object Detection Indicator.
- A Left Side Object Detection Indicator harness that is open or shorted.
- A Left Side Object Detection Indicator circuit with poor electrical connection.
Fixing Error Code b094d Step By Step
To resolve fault code B094D, inspect and repair the passengerside seatbelt buckle switch circuit.
- To fix OBDII code B094D, first, review the possible causes related to this code.
- Visually examine the wiring harness and connectors associated with the affected system.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Repair or replace any damaged wiring or connectors found during the inspection.
- Clear the fault code from the vehicle’s computer using a scan tool.
- Test drive the vehicle to ensure the code does not return.
- If the code persists, further diagnostics may be necessary to pinpoint the exact cause of the issue.
Cost Of Fixing b094d Fault Code
Diagnosing and repairing fault code B094D may involve inspecting and replacing the steering angle sensor.
The cost to diagnose and fix OBD code B094D depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Actual cost may vary based on shop rates and the complexity of the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the b094d OBD Code
Code B094D relates to a fault in the steering angle sensor module.
OBD code B094D means Left Rear Side Object Sensor 1 Circuit High.
This code is triggered by the Body Control Module (BCM) when it detects a high voltage signal from the left rear side object sensor 1. The left rear side object sensor 1 is part of the parking assist system in the vehicle and is responsible for detecting obstacles or objects on the left rear side of the vehicle.
When the sensor detects a high voltage signal, it indicates a potential issue with the sensor circuit or the sensor itself, which may require further diagnosis and repair.
Mechanic’s Tech Notes
Code B094D indicates a fault in the steering angle sensor module.
To diagnose and fix OBDII code B094D, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection will help identify and address any issues causing the B094D fault code.
FAQ
OBD code B094D indicates a fault with the Left Side Object Detection Indicator. Check wiring harness, connectors, and components for damage or poor connection.
Common symptoms of OBD code B094D include Engine Light ON. Causes may be a faulty Left Side Object Detection Indicator or related wiring issues. Fix: Inspect and repair wiring and connectors.
Diagnose OBD code B094D by checking the left side object detection indicator and its wiring for faults. Repair any damaged components or connectors found.
Wrap Up
If your vehicle displays OBD code b094d, you may experience issues with the fuel system, such as a faulty fuel pump, clogged fuel filter, or fuel pressure sensor malfunction.
Wiring problems or a low fuel level could also trigger this code.
To address OBD code b094d, check the fuel pump operation, inspect the fuel pressure sensor for proper function, examine the fuel filter for blockages, and ensure the wiring harness connected to these components is intact and secure.
Replace any faulty parts as needed to resolve the issue.
