OBD code B0106 indicates an issue with the Front Passenger Airbag Assembly (P Squib) circuit.
Symptoms include the Air Bag Warning Light being ON.
Causes may include a faulty airbag assembly, open or shorted harness, or poor electrical connection.
This is a serious issue as it affects the airbag system’s functionality.
To fix, inspect and repair any damaged components, wiring harness, or connectors related to the Front Passenger Airbag Assembly.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the b0106 OBD Code
The vehicle’s airbag warning light is illuminated on the dashboard.
- Symptoms: Air Bag Warning Light ON
Causes of the b0106 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code B0106 include issues with the driver’s airbag module or wiring.
- B0106 can be caused by a faulty Front Passenger Airbag Assembly (P Squib).
- A Front Passenger Airbag Assembly (P Squib) harness that is open or shorted.
- A Front Passenger Airbag Assembly (P Squib) circuit with a poor electrical connection.
- A faulty Airbag Sensor Assembly.
Fixing Error Code b0106 Step By Step
Replace the front impact sensor on the vehicle to address fault code B0106.
- To fix OBDII code B0106, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the airbag crash sensor.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no issues are found with the wiring and connectors, consider replacing the airbag crash sensor itself.
- After replacing the sensor, clear the fault codes and perform a test drive to ensure the issue is resolved.
Cost Of Fixing b0106 Fault Code
The repair for fault code B0106 typically involves replacing the driver’s side airbag inflator module.
The cost to diagnose and fix OBD code B0106 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. The final cost may vary based on shop rates and the complexity of the repair.
Details of the b0106 OBD Code
B0106 indicates a fault in the driver’s side airbag inflator circuit resistance being too high.
OBD code B0106 means Driver Seatbelt Buckle Switch Circuit Low.
This code is triggered by the restraint control module (RCM) when it detects a low voltage signal from the driver seatbelt buckle switch circuit.
The system involved is the driver seatbelt buckle switch circuit, which is responsible for monitoring the status of the driver’s seatbelt buckle to ensure it is properly latched.
Mechanic’s Tech Notes
Code B0106 indicates a fault in the driver’s side airbag inflator circuit.
OBDII code B0106 indicates a malfunction in the TCM (Transmission Control Module) power supply circuit.
To diagnose, use a voltmeter to check TCM power and ground connections for proper voltage levels.
Utilize a scan tool to confirm TCM communication over the CAN network.
Visually inspect wiring harnesses and connectors for any damage, and ensure connector pins are not broken, bent, or corroded.
If all checks out, consider reprogramming the TCM.
FAQ
OBD code B0106 indicates an issue with the Front Passenger Airbag Assembly (P Squib). Check wiring harness, connectors, and components for faults.
Common symptoms of OBD code B0106 include Air Bag Warning Light ON. Causes may be a faulty Front Passenger Airbag Assembly (P Squib) or related wiring issues. Fix: Inspect and repair wiring connections.
Diagnose and repair OBD code B0106 by checking front passenger airbag assembly, harness, and connections for faults. Inspect for damage or poor electrical connections.
Wrap Up
If your airbag warning light is on and you see OBDII code b0106, it may indicate a fault with the right front crash sensor.
This could be caused by a damaged sensor, faulty wiring, or poor connections in the sensor circuit.
To address OBDII code b0106, check the wiring and connectors leading to the right front crash sensor for any signs of damage or corrosion.
Test the sensor itself for proper operation and replace it if necessary to resolve the issue.
