The automobile fault code u2013 is a common issue that can cause the engine light to turn on or the service engine soon warning light to appear. The symptom of this fault code is blank compass readings.
The cause of this issue can be a faulty auto-dimming interior mirror, an open or shorted harness, poor electrical connection, or a faulty instrument cluster.
The importance of fixing this issue lies in the fact that it can affect the accuracy of the compass readings.
The repair time for this issue is 1.0, and the fix involves visually inspecting the related wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Decoding U2013: Common Symptoms Of This Fault Code
If you’re experiencing an illuminated engine light and blank compass readings, read on to learn more about the symptoms of the automobile fault code: u2013.
- The automobile fault code u2013 has two main symptoms.
- The first symptom is that the engine light turns on, or the service engine soon warning light appears.
- The second symptom is that the compass readings become blank.
- It is important to note that these are the only symptoms associated with this particular fault code.
- If you experience either of these symptoms, it is recommended that you take your vehicle to a qualified mechanic for diagnosis and repair.
Decoding U2013: Common Causes Of Fault Code
The u2013 fault code can be caused by a faulty auto-dimming interior mirror, open or shorted harness, poor electrical connection, or a faulty instrument cluster.
- The automobile fault code u2013 can be caused by a faulty Auto-Dimming Interior Mirror.
- It can also be caused by an open or shorted Auto-Dimming Interior Mirror harness.
- Another cause can be a poor electrical connection in the Auto-Dimming Interior Mirror circuit.
- Lastly, a faulty Instrument Cluster (IC) can also trigger this fault code.
Fix U2013 Code: Simple Steps To Get Your Car Running
Below are the possible fixes for the automobile fault code: u2013.
- To fix the automobile fault code u2013, you need to follow these steps: Check the possible causes mentioned above, visually inspect the wiring harness and connectors, look for damaged components, and check for broken, bent, pushed out, or corroded connector’s pins.
- The estimated repair time for this fix is 1.0 hour.
Crunching The Numbers: U2013 Code Fixing Cost & Complexity
The main factor for the automobile fault code diagnosis and fixing cost is the estimated repair time, which is typically around 1.0 hour. The cost of repair is also influenced by the hourly rate charged by the auto repair shop, which can range from $75 to $150 per hour. Other factors that may affect the cost include the severity of the issue, the type of vehicle, and the availability of replacement parts.
It is important to consider all of these factors when estimating the cost of diagnosing and fixing an automobile fault code.
Decoding Fault Code U2013: Symptoms, Causes, And Fixes
The U2013 fault code indicates that the compass sensor module is not responding. The Auto-Dimming Interior Mirror receives voltage from the Smart Junction Box (SJB). The auto-dimming interior mirror communicates the vehicle direction to the Instrument Cluster (IC) through the compass communication data plus circuit and compass communication data minus circuit.
If the IC fails to receive the compass data, the IC sets DTC U2013 and defaults the compass display to (—-).
The Diagnostic Trouble Code (DTC) sets in continuous memory and on-demand if the IC is missing the compass data from the auto-dimming interior mirror.
FAQ
If you see the u2013 automobile fault code and your engine light is on, it could be due to a faulty auto-dimming interior mirror, an open or shorted harness, a poor electrical connection in the mirror circuit, or a faulty instrument cluster. To fix the issue, inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector pins.
If you’re experiencing the u2013 automobile fault code, which is indicated by the engine light or service engine soon warning light being on, and your compass readings are blank, it could be due to a faulty auto-dimming interior mirror, an open or shorted harness, poor electrical connection in the circuit, or a faulty instrument cluster. To fix this issue, visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
No, a faulty Auto-Dimming Interior Mirror is not the only cause of the u2013 automobile fault code. Other possible causes include an open or shorted harness, poor electrical connection in the circuit, or a faulty Instrument Cluster (IC). To fix the issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
If your engine light is on and your compass readings are blank, it may be due to a faulty auto-dimming interior mirror or poor electrical connection.
To fix this, visually inspect the wiring harness and connectors for damage and check for broken or corroded pins.
