The OBD code P2714 for Toyota indicates an issue with the Pressure Control Solenoid ‘D’ valve in the automatic transmission system.
Symptoms include the Engine Light being ON.
Causes can range from low transmission fluid level to a faulty solenoid valve or wiring issues.
This code should be addressed promptly to prevent further transmission damage.
A possible fix involves inspecting and repairing the related components and wiring connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Toyota p2714 OBD Code
The vehicle may exhibit harsh shifting, slipping, or no movement in gear with fault code P2714.
- Symptoms: Engine Light ON.
- Possible harsh shifting from the transmission.
- Loss of power during acceleration.
- Difficulty shifting gears.
- Jerking or hesitation when driving.
Causes of the Toyota p2714 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
P2714 in Toyota indicates a potential issue with the pressure control solenoid D performance.
- P2714 can be caused by a low transmission fluid level.
- Dirty transmission fluid.
- A faulty Pressure Control Solenoid ‘D’ valve (Shift Solenoid Valve SLT).
- An open or shorted Pressure Control Solenoid ‘D’ valve harness.
- Poor electrical connection in the Pressure Control Solenoid ‘D’ valve circuit.
- A blocked transmission valve body assembly.
- Or a faulty Automatic transaxle assembly.
Fixing Toyota Error Code p2714 Step By Step
Address the pressure control solenoid D electrical circuit issue associated with Toyota fault code P2714.
- To fix Toyota OBDII code P2714, first, review the possible causes related to this code.
- Visually examine the wiring harness and connectors associated with the pressure control solenoid D circuit.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no visible issues are found, perform a resistance test on the pressure control solenoid D and its circuit.
- Replace the pressure control solenoid D if the resistance is out of specifications.
- Clear the fault codes and test drive the vehicle to verify the repair.
Cost Of Fixing Toyota p2714 Fault Code
The repair for fault code P2714 on a Toyota typically involves replacing the pressure control solenoid.
The cost to diagnose and fix Toyota OBD code P2714 typically ranges from $75 to $150, based on a 1. 0hour repair time.
Factors like shop rates and complexity can affect the final cost.
Details of the Toyota p2714 OBD Code
Code P2714 in Toyota indicates a problem with the pressure control solenoid D performance.
Code P2714 for Toyota vehicles means Pressure Control Solenoid ‘D’ Performance/Stuck Off.
This code is triggered by the Engine Control Module (ECM) when it detects a performance issue or that the solenoid is stuck in the off position.
The pressure control solenoid ‘D’ is part of the transmission control system and is responsible for regulating the hydraulic pressure in the transmission.
When this solenoid malfunctions or gets stuck off, it can lead to shifting issues, harsh shifting, or transmission slipping.
It’s important to inspect the wiring harness connected to the pressure control solenoid ‘D’ for any damage or loose connections.
Additionally, the solenoid itself may need to be tested to determine if it is functioning properly.
If necessary, the solenoid may need to be replaced to resolve the issue.
Mechanic’s Tech Notes
This section provides detailed information on diagnosing and fixing Toyota fault code P2714.
To diagnose and fix OBDII code P2714 on a Toyota, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Additionally, visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection can help identify and resolve issues related to code P2714.
FAQ
Common symptoms of OBD code P2714 in a Toyota: Engine Light ON, possible causes include low transmission fluid, dirty fluid, faulty Pressure Control Solenoid ‘D’ valve.
OBD code P2714 in a Toyota is typically caused by low transmission fluid, dirty fluid, faulty Pressure Control Solenoid ‘D’ valve, or related electrical issues.
Diagnose and repair OBD code P2714 in your Toyota by checking transmission fluid level, inspecting solenoid valve, and examining wiring harness for damage or poor connections.
Wrap Up
If your Toyota is displaying OBD code P2714 and experiencing harsh shifting, slipping transmission, or difficulty engaging gears, it may be caused by a malfunctioning pressure control solenoid D in the transmission, low transmission fluid level, or a faulty transmission control module.
To address Toyota OBD code P2714, check the transmission fluid level and condition, inspect the wiring harness and connectors for any damage, test the pressure control solenoid D for proper operation, and verify the transmission control module functionality.
Replace any faulty components as needed to resolve the issue.
