The OBD code P2419 for Toyota indicates a fault with the Canister Pump Module.
Symptoms include the Engine Light being illuminated.
This issue is commonly caused by a faulty Canister Pump Module or related wiring issues.
While not a critical problem, it should be addressed promptly.
To fix it, inspect the wiring harness and connectors for any damage or poor connections.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Toyota p2419 OBD Code
The vehicle may exhibit issues with the evaporative emission system due to fault code P2419.
- Symptoms: Engine Light ON.
- Reduced engine power.
- Rough idle.
- Increased fuel consumption.
- Difficulty starting the engine.
Causes of the Toyota p2419 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
P2419 in a Toyota typically indicates an issue with the evaporative emission system pressure sensor.
- P2419 can be caused by a faulty Canister Pump Module.
- A Canister Pump Module harness that is open or shorted.
- A Canister Pump Module circuit with poor electrical connection.
- A faulty Engine Control Module (ECM).
Fixing Toyota Error Code p2419 Step By Step
Address the issue by inspecting the EVAP system for leaks or blockages causing code P2419 on Toyota.
- To fix Toyota OBDII code P2419, first, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the operation of the VSV for EVAP.
- Test the VSV for proper function and replace if necessary.
- Clear the fault codes from the vehicle’s computer using a scan tool.
- Finally, test drive the vehicle to ensure the code does not return, indicating a successful repair.
Cost Of Fixing Toyota p2419 Fault Code
The repair for Toyota fault code P2419 may involve replacing the evaporative emission system pressure sensor.
The cost to diagnose and fix a Toyota OBD code P2419 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
The final cost depends on labor rates, shop fees, and the complexity of the repair needed.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Toyota p2419 OBD Code
Code P2419 in Toyota indicates an issue with the EVAP system switching valve control circuit range/performance.
Code P2419 for Toyota means EVAP Switching Valve Control Circuit Low.
This code is triggered by the Engine Control Module (ECM) when it detects a low voltage signal from the EVAP switching valve control circuit.
The EVAP system helps control fuel vapors in the vehicle to reduce emissions.
When the ECM detects a low voltage signal from the switching valve control circuit, it triggers this fault code.
Mechanic’s Tech Notes
Detailed information on Toyota fault code P2419, including symptoms, causes, and diagnostic procedures.
To diagnose and fix OBDII code P2419 in a Toyota, start by checking the transmission control module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Additionally, visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection can help identify and resolve issues related to code P2419.
FAQ
Common symptoms of OBD code P2419 in a Toyota: Engine Light ON. Possible causes: Faulty Canister Pump Module, wiring issues. Fix: Inspect wiring harness, connectors for damage.
OBD code P2419 in a Toyota is typically caused by a faulty Canister Pump Module, open/shorted harness, poor connection, or faulty ECM. Inspect and repair as needed.
Diagnose and repair OBD code P2419 in your Toyota by checking for a faulty Canister Pump Module, harness issues, or ECM problems. Inspect wiring and connectors for damage.

Wrap Up
If your Toyota triggers OBD code P2419 and you notice issues with the EVAP system, it could be caused by a faulty fuel cap, a leak in the EVAP system, or a malfunctioning EVAP pressure sensor.
These issues can lead to difficulties during fueling, a fuel smell in or around the vehicle, or an illuminated check engine light.
To address Toyota OBD code P2419, start by inspecting the fuel cap for proper sealing and any visible damage.
Next, check the EVAP system for leaks using a smoke machine or a visual inspection.
Finally, test the