The OBD code P0328 for Toyota indicates a fault with the Knock Sensor Circuit High Input.
This affects the engine’s ability to adjust ignition timing properly, leading to symptoms like the Engine Light ON, engine lack of power.
Common causes include a faulty knock sensor, poor electrical connections, or issues with the Engine Control Module.
While not an immediate danger, it can affect engine performance.
A possible fix involves inspecting and repairing the knock sensor circuit and related components.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Toyota p0328 OBD Code
The vehicle may experience poor acceleration and increased fuel consumption with fault code P0328.
- With OBD code P0328 on a Toyota, symptoms may include: Engine Light ON.
- Engine Lack / Loss of Power.
Causes of the Toyota p0328 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible reasons for Toyota fault code P0328 include faulty knock sensor, wiring issues, or engine mechanical problems.
- P0328 can be caused by a Faulty Knock Sensor.
- A Knock Sensor circuit with poor electrical connection.
- An open or shorted Knock Sensor harness.
- Or a Faulty Engine Control Module (ECM).
Fixing Toyota Error Code p0328 Step By Step
Replace faulty knock sensor to address Toyota fault code P0328.
- To fix Toyota OBDII code P0328, first, review the possible causes related to the knock sensor circuit.
- Visually inspect the wiring harness and connectors for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- Test the knock sensor and its wiring for proper resistance and continuity.
- Replace the knock sensor if necessary.
- Clear the fault codes and perform a test drive to verify the repair.
Cost Of Fixing Toyota p0328 Fault Code
Diagnosing and repairing fault code P0328 on a Toyota involves testing and potentially replacing the knock sensor.
The cost to diagnose and fix a Toyota OBD code P0328 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost can vary based on shop rates and the complexity of the repair.
Details of the Toyota p0328 OBD Code
Fault code P0328 in a Toyota indicates a high voltage condition in the knock sensor circuit.
Code P0328 for Toyota vehicles indicates a knock sensor circuit high input condition.
This means that the knock sensor has detected a higher than normal voltage signal, which could be caused by engine knocking or pinging.
The knock sensor is responsible for detecting abnormal combustion in the engine, which can cause damage if not addressed.
The signal involved is the voltage signal from the knock sensor to the engine control module (ECM).
When the ECM receives a high voltage signal from the knock sensor, it triggers the P0328 fault code to alert the driver or technician of a potential issue with engine combustion.
Mechanic’s Tech Notes
Detailed information on diagnosing and repairing fault code P0328 in Toyota vehicles.
To diagnose and fix OBDII code P0328 on a Toyota, start by checking the knock sensor circuit.
Use a voltmeter to test the sensor’s resistance and ensure it falls within specifications.
Inspect the wiring harness for any damage or corrosion.
Verify the knock sensor connector for proper connection and signs of damage.
If everything looks good, consider replacing the knock sensor itself.
Additionally, using a scan tool, monitor the sensor’s data while the engine is running to ensure it’s functioning correctly.
If the issue persists, further diagnosis may be needed to pinpoint the exact cause.
FAQ
Common symptoms of OBD code P0328 in a Toyota: Engine Light ON, engine lack of power. Causes: Faulty knock sensor, poor electrical connection. Fix: Inspect wiring and connectors for damage.
The typical cause of OBD code P0328 in a Toyota vehicle is a faulty knock sensor, poor electrical connection in the knock sensor circuit, or a damaged wiring harness.
Diagnose and repair OBD code P0328 in a Toyota by checking for a faulty knock sensor, poor electrical connections, or damaged wiring harness/connectors.
Wrap Up
If your Toyota triggers OBDII code P0328 and experiences poor fuel economy, rough idling, or difficulty starting, it may indicate a faulty knock sensor circuit.
Possible causes include a defective knock sensor, damaged wiring, or poor sensor connection.
To address Toyota OBDII code P0328, inspect the knock sensor and its wiring harness for any signs of damage or corrosion.
Test the sensor’s resistance and ensure proper connection at the sensor and ECU.
Replace the knock sensor if necessary to restore engine performance.
