The OBD code P0174 for Toyota indicates a lean condition in bank 2 of the engine.
This code affects the fuel system.
Symptoms include the Check Engine Light on and increased fuel consumption.
Common causes are intake air leaks, fuel injector blockage, faulty MAF sensor, or issues with various sensors.
While not an immediate threat, it can lead to engine damage if left unresolved.
A possible fix involves inspecting and repairing any damaged components or wiring related to the intake system and sensors.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Toyota p0174 OBD Code
The vehicle may exhibit a lean condition on bank 2 of the engine.
- Symptoms: Engine Light ON.
- Rough idle.
- Hesitation or lack of power during acceleration.
- Excessive fuel consumption.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Causes of the Toyota p0174 OBD Code
Possible reasons for Toyota P0174 include vacuum leaks, faulty MAF sensor, or fuel delivery issues.
- P0174 can be caused by intake air leaks.
- Fuel injector blockage.
- Faulty Mass Air Flow (MAF) sensor.
- Faulty Engine Coolant Temperature Sensor.
- Faulty Air Fuel Ratio (A/F) Sensor (Front Oxygen Sensor).
- Incorrect fuel pressure.
- Gas leak from exhaust system.
- Faulty Positive Crankcase Ventilation (PCV) hose connection.
- Air Fuel Ratio Sensor harness is open or shorted.
- Air Fuel Ratio Sensor circuit poor electrical connection.
- Faulty Engine Control Module (ECM).
Fixing Toyota Error Code p0174 Step By Step
Addressing a lean condition on bank 2 by checking for vacuum leaks and inspecting the intake system.
- To fix Toyota OBDII code P0174, start by reviewing the possible causes related to a lean condition on bank 2.
- Visually inspect the intake system for any vacuum leaks, such as cracked hoses or loose connections.
- Check the Mass Air Flow (MAF) sensor for dirt or contamination and clean if necessary.
- Inspect the fuel pressure and volume to ensure it meets specifications.
- Consider replacing the oxygen sensor on bank 2 if it’s old or faulty.
- Reset the Engine Control Module (ECM) to clear the code and monitor the system for any reoccurrence.
Cost Of Fixing Toyota p0174 Fault Code
The repair for Toyota P0174 typically involves diagnosing and fixing issues with the fuel system.
The cost to diagnose and fix a Toyota OBD code P0174 is typically based on an estimated repair time of 1. 0 hour.
Labor rates range from $75 to $150 per hour, so the total cost can vary between $75 and $150, depending on shop rates and the complexity of the repair.
Details of the Toyota p0174 OBD Code
The Toyota P0174 code indicates a lean condition in bank 2 of the engine.
Code P0174 for Toyota vehicles means that the engine control module (ECM) has detected a lean condition in bank 2 of the engine.
This indicates that there is too much air and not enough fuel in the airfuel mixture being delivered to the engine cylinders on that bank.
The ECM triggers this code based on data from the oxygen sensors, which measure the oxygen content in the exhaust gases.
A lean condition can be caused by issues such as a vacuum leak, a faulty mass airflow sensor, a clogged fuel filter, or a malfunctioning fuel injector on bank 2 of the engine.
Mechanic’s Tech Notes
Detailed information on diagnosing and fixing Toyota fault code P0174 related to a lean condition in bank 2.
To diagnose and fix OBDII code P0174 on a Toyota, start by checking for vacuum leaks in the intake system.
Use a smoke machine or propane torch carefully around intake gaskets, hoses, and connections.
Inspect the MAF sensor for dirt or debris that could affect its readings.
Test the fuel pressure to ensure it meets specifications.
Check for a clogged fuel filter or weak fuel pump.
Verify the functionality of the oxygen sensors and the PCV system.
If all checks out, consider cleaning the throttle body and performing an idle relearn procedure.
FAQ
Common causes of OBD code P0174 in a Toyota: intake air leaks, fuel injector blockage, faulty MAF sensor, faulty A/F sensor, incorrect fuel pressure.
Diagnose P0174 in Toyota: Check for intake air leaks, fuel injector blockage, faulty MAF sensor, A/F sensor, fuel pressure, exhaust leaks, PCV hose, wiring issues.
Address the P0174 fault code immediately. Continuing to drive may lead to further engine damage and decreased fuel efficiency. Inspect and repair possible causes promptly.
Wrap Up
If your Toyota triggers OBDII code P0174 and you notice a decrease in fuel efficiency, rough idling, or a lack of power, it may be caused by a vacuum leak, faulty oxygen sensor, or a clogged fuel filter.
To address Toyota OBDII code P0174, inspect the intake system for leaks, test the oxygen sensor’s performance, check the fuel filter for blockages, and ensure proper fuel pressure from the fuel pump.
Replace any faulty components as needed to resolve the issue.
