[SOLVED] Toyota C1515 Code: Quick Fix For Torque Sensor Calibration

The OBD code C1515 for Toyota indicates a communication error between the ABS control module and the skid control ECU.

Symptoms include the ABS warning light and engine light being illuminated.

This code does not point to a specific malfunction.

To address it, inspect the wiring harness, connectors, and component integrity for any issues.

This issue is moderate in severity.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

The vehicle displays an ABS warning light on the dashboard with fault code Toyota C1515.

  • Symptoms: AntiLock Brake System (ABS) Warning Light ON.
  • Engine Light ON (or Service Engine Soon Warning Light).
  • Possible loss of ABS functionality.
  • Unusual noises from the ABS system.
  • Difficulty braking in certain conditions.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible reasons for Toyota fault code C1515 include issues with the brake switch or wiring.

  • C1515 can be caused by faulty wheel speed sensors.
  • Broken wiring harness connectors.
  • Low voltage in the ABS system.
  • Corroded ground connections.
  • Or signal loss between components.

Resolve fault code Toyota C1515 by inspecting and repairing the brake switch circuit as needed.

  • To fix Toyota OBDII code C1515, first, review the possible causes mentioned above.
  • Visually examine the corresponding wiring harness and connectors.
  • Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
  • If no issues are found with the wiring and connectors, proceed to test the skid control ECU.
  • Replace the skid control ECU if necessary.
  • Finally, clear the fault codes and perform a road test to confirm the repair.

The repair for Toyota fault code C1515 typically involves replacing the brake fluid pressure sensor.

The cost to diagnose and fix Toyota OBD code C1515 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.

Costs depend on shop rates, complexity of the issue, and any additional parts or labor needed for the repair.

Toyota fault code C1515 relates to the brake switch circuit malfunction.

OBD code C1515 for Toyota vehicles indicates a fault with the left front wheel speed sensor circuit.

This code is triggered by the ABS control module when it detects an issue with the signal from the left front wheel speed sensor.

The ABS control module uses this sensor to monitor the speed of the left front wheel for proper ABS operation and traction control.

If the sensor or its circuit has a problem, it can lead to the C1515 fault code being set in the vehicle’s system.

For Toyota C1515, check for faulty brake fluid level sensor or wiring issues.

To diagnose and fix OBDII code C1515 in a Toyota, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.

This thorough inspection can help identify and resolve issues related to code C1515.

1. What are the common symptoms associated with OBD code C1515 in a Toyota vehicle?

Common symptoms for OBD code C1515 in a Toyota: ABS Warning Light ON, Engine Light ON. Causes: No malfunction indicated. Fix: Inspect wiring, connectors, and components for damage or corrosion.

2. What is the typical cause of OBD code C1515 in a Toyota vehicle?

OBD code C1515 in a Toyota is typically caused by issues with the wiring harness or connectors. Check for damage or corrosion on connector pins.

3. How can I diagnose and repair OBD code C1515 in my Toyota vehicle?

Diagnose OBD code C1515 in Toyota: Symptoms ABS & Engine Light ON. Causes No malfunction. Fix Inspect wiring, connectors, and components for damage or corrosion.

Toyota c1515 error fault code explained

If your Toyota is displaying OBDII code C1515 along with ABS warning lights, it may indicate a fault in the brake switch circuit.

This could be caused by a faulty brake light switch, damaged wiring, or poor electrical connections in the brake system.

To address Toyota OBDII code C1515, start by inspecting the brake light switch and its wiring harness for any signs of damage or corrosion.

Test the switch for proper operation and ensure all electrical connections are secure.

Replace the brake light switch if necessary and repair any damaged wiring to resolve the issue.

Scroll to Top