[SOLVED] Toyota B1794 Code: Repair Open Occupant Classification Ecu Battery Line

The OBD code B1794 for Toyota indicates an issue with the Occupant Detection ECU.

Symptoms include the Air Bag Warning Light being ON.

This is usually caused by a faulty Occupant Detection ECU, open/shorted harness, or poor electrical connection.

While not a critical issue, it affects safety systems.

To fix, inspect and repair any damaged components or wiring connections related to the Occupant Detection ECU.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

The specific fault code B1794 in a Toyota indicates an issue with the key identification.

  • Symptoms: Air Bag Warning Light ON

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible triggers for Toyota fault code B1794 include issues with the occupant classification system.

  • B1794 can be caused by a faulty Occupant Detection ECU.
  • An open or shorted Occupant Detection ECU harness.
  • A poor electrical connection in the Occupant Detection ECU circuit.

Address the issue by inspecting the driver side airbag module circuit for Toyota fault code B1794.

  • To fix Toyota OBDII code B1794, start by reviewing the possible causes mentioned above.
  • Visually examine the wiring harness and connectors related to the airbag system.
  • Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
  • If no visible issues are found, perform a diagnostic scan tool test to pinpoint the exact cause of the B1794 code.
  • Based on the scan results, replace any faulty components such as the airbag sensor, clock spring, or airbag control module.
  • Clear the fault codes from the vehicle’s computer memory after completing the repair to reset the system.

Diagnosing and repairing fault code B1794 in a Toyota may involve replacing the occupant classification ECU.

The cost to diagnose and fix Toyota OBD code B1794 depends on the estimated 1. 0hour repair time.

Labor rates range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity can affect the final cost.

The Toyota B1794 code indicates a malfunction in the occupant classification system.

OBD code B1794 for Toyota vehicles indicates a malfunction in the Occupant Classification System ECU.

This code is triggered by the Occupant Classification System ECU when it detects an internal malfunction within the system.

The Occupant Classification System is responsible for determining whether the front passenger seat is occupied and the weight of the occupant to control airbag deployment.

When the system detects a fault, it will trigger the B1794 code to alert the driver or technician of the issue.

Detailed information on Toyota fault code B1794, including symptoms, causes, and repair procedures.

OBDII code B1794 in a Toyota typically indicates an issue with the transmission control module (TCM).

To diagnose, check TCM power and ground using a multimeter.

Use a scan tool to confirm TCM communication over the CAN network.

If no communication is detected, reprogramming or reflashing the TCM may be necessary.

Visually inspect wiring harnesses and connectors for damage, and check connector pins for any signs of corrosion, bending, or breakage.

This thorough inspection can help pinpoint the root cause of the B1794 fault code.

1. What does OBD code B1794 mean in a Toyota vehicle?

OBD code B1794 in a Toyota means an issue with the Occupant Detection ECU. Check for wiring harness faults and connector issues causing the Air Bag Warning Light to illuminate.

2. What are the common symptoms associated with code B1794 in a Toyota?

Common symptoms for Toyota code B1794 include Air Bag Warning Light ON. Causes may be a faulty Occupant Detection ECU or related wiring issues. Inspect and repair as needed.

3. How can I diagnose and repair OBD code B1794 in my Toyota vehicle?

Diagnose and repair OBD code B1794 in a Toyota: Symptoms Air Bag Warning Light ON; Causes Faulty Occupant Detection ECU, harness issues; Fix Inspect and repair wiring/connectors.

Toyota b1794 error fault code explained

If your Toyota is showing OBDII code b1794, you may experience issues with the airbag system, such as the airbag warning light staying on.

This code typically indicates a problem with the front collision sensor circuit, which could be caused by a faulty sensor, damaged wiring, or poor connections.

To address Toyota OBDII code b1794, start by inspecting the front collision sensor and its wiring harness for any visible damage.

Check the sensor’s connectors for corrosion or loose connections.

If no issues are found, consider testing the sensor’s functionality or consulting a professional for further diagnosis

Scroll to Top