The OBD code U0424 for Ram vehicles indicates a communication error between the Heating, Ventilation, and Air Conditioning (HVAC) Control Module and other modules.
Symptoms include the Engine Light being ON.
This issue is commonly caused by a faulty HVAC Control Module or related wiring issues.
It is important to address promptly to prevent further electrical system problems.
A possible fix involves inspecting and repairing the HVAC Control Module harness and connectors for any faults.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Ram u0424 OBD Code
The vehicle displays a warning light indicating a communication error with the body control module.
- Symptoms: Service 4WD System warning light may illuminate.
- Issues with the 4WD system engagement.
- Possible loss of 4WD functionality.
- Difficulty shifting into 4WD modes.
Causes of the Ram u0424 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code U0424 in a Ram vehicle include communication issues within the powertrain control module.
- U0424 can be caused by a faulty Heating, Ventilation, and Air Conditioning (HVAC) Control Module.
- A HVAC Control Module harness that is open or shorted.
- A HVAC Control Module circuit with a poor electrical connection.
Fixing Ram Error Code u0424 Step By Step
Resolve the Ram U0424 code by inspecting the wiring harness for faults or damage.
- To fix the Ram OBDII code U0424, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the ABS control module.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no visible issues are found, perform a diagnostic scan tool test to communicate with the ABS module.
- Reset the module if necessary or replace it if the issue persists.
Cost Of Fixing Ram u0424 Fault Code
The repair for fault code U0424 in a Ram involves diagnosing and fixing a communication error.
The cost to diagnose and fix Ram OBD code U0424 is typically based on 1. 0 hour of labor, with rates ranging from $75 to $150 per hour.
The total cost will depend on shop rates, complexity of the issue, and any additional parts or services needed.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Ram u0424 OBD Code
The Ram fault code U0424 indicates an invalid data received from the powertrain control module.
OBD code U0424 for a Ram vehicle indicates a communication error between the powertrain control module (PCM) and the auxiliary heater control module.
This code is triggered when the PCM does not receive the expected data from the auxiliary heater control module over the Controller Area Network (CAN) bus system.
The auxiliary heater control module is responsible for controlling the operation of the vehicle’s auxiliary heater, which helps warm up the cabin during cold weather conditions.
When the communication between these modules is disrupted, the U0424 code is set, indicating a potential issue with the auxiliary heater control module, the CAN bus system, or the PCM itself.
Mechanic’s Tech Notes
Ram code U0424 relates to an issue with the invalid data received from the powertrain control module.
To diagnose and fix OBDII code U0424 in a Ram, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.
Address any issues found during the inspection to resolve the U0424 fault code.
FAQ
OBD code U0424 in a Ram vehicle indicates a fault with the Heating, Ventilation, and Air Conditioning (HVAC) Control Module. Check wiring, connectors, and components for issues.
Diagnose OBD code U0424 in your Ram by checking HVAC Control Module and related wiring for faults. Inspect connectors for damage or corrosion.
Common symptoms of OBD code U0424 in a Ram truck include Engine Light ON. The cause could be a faulty HVAC Control Module. Fix: Inspect wiring and connectors for damage.

Wrap Up
If your Ram is displaying OBD code U0424 and experiencing erratic speedometer readings, nonfunctioning cruise control, or ABS system malfunctions, it may be caused by a faulty ABS control module, damaged wheel speed sensors, or issues with the wiring harness connecting these components.
To address Ram OBD code U0424, start by inspecting the wiring harness for any visible damage or corrosion.
Test the wheel speed sensors for proper operation and connectivity.
If necessary, replace the ABS control module and repair any damaged wiring or connectors in the system.
Resources
- Jeep P1034
- Mazda P0506
- Lincoln P2104
- Dodge P0353
- Isuzu P1114
- Dodge B17d4
- Mazda P0551
- Jeep B230a
- Fiat P1d8d
- Pontiac B0268
- Jeep P1267
- Dodge P3466
- Dodge P204a
- Dodge P2038
- Mini P158c
- Dodge P0270
- Dodge P2222
- Dodge U1113
- Mini P0140
- Mercury B295d
- Dodge P1021
- Dodge P2528
- Ram B19b7
- Mazda P0729
- Pontiac P1656
- Fiat U11d5
- Pontiac B0085
- Mercury B2562
- Isuzu P1239
- Pontiac C0248