The P2704 automobile fault code indicates a problem with the transmission friction element D application. The most common symptom is the illumination of the engine light or service engine soon warning light. The cause of this fault code can be low tire air pressure, damaged steering gear bellows boot, contaminated gearrack, inner tie rods, or steering gear internal failure.
The repair importance is high as it can lead to transmission failure.
The difficulty level of repair is moderate, and the fix involves visually inspecting the related wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector’s pins. The repair time is estimated to be 1.0 hour.
It is crucial to interpret the fault code correctly to avoid further damage to the vehicle.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
P2704: Identifying Slipping Gears In Your Vehicle
If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p2704 fault code. Here are the symptoms to look out for:
- The P2704 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include harsh shifting, transmission slippage, decreased fuel efficiency, and difficulty shifting gears.
- Additionally, the vehicle may experience a decrease in power or acceleration, and the transmission may fail to engage or disengage properly.
- It is important to address these symptoms promptly to prevent further damage to the vehicle.
P2704: Culprits Behind Transmission Friction Issues
P2704 fault code in automobiles can be caused by a range of factors, including low tire air pressure, damaged steering gear bellows boot, contaminated gearrack, inner tie rods, and steering gear internal failure.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- The automobile fault code P2704 can be caused by low tire air pressure.
- It can also be caused by a damaged steering gear bellows boot.
- Contaminated gear/rack is another cause of this fault code.
- Inner tie rods can also lead to the P2704 code.
- Lastly, steering gear internal failure can cause this fault code to appear.
Fix Code P2704: Simple Steps To Get Your Car Running
Below are the possible fixes for the automobile fault code p2704, including inspecting wiring harness and connectors for damage or corrosion.
- To fix the automobile fault code P2704, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P2704: Affordable Fix For Complex Transmission Issue
The automobile fault code P2704 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of repair is influenced by the repair time, which is commonly charged between $75 and $150 per hour by most auto repair shops.
Therefore, the total cost of fixing the P2704 fault code will depend on the hourly rate charged by the repair shop and the estimated repair time required to fix the issue.
P2704: Transmission Friction Element ‘e’ Performance
The P2704 fault code is related to the Transmission Friction Element ‘E’ Apply Time RangePerformance. This code is triggered when the Power Steering Control Module (PSCM) detects an issue with the amount of force needed to assist with vehicle steering.
The PSCM will monitor this force when the ignition is ON and the voltage supply to the PSCM is above 6 volts, all other Electric Power-Assisted Steering (EPAS) sensors are functioning correctly and the EPAS gear is providing assist.
FAQ
If you see the engine light or service engine soon warning light with the fault code P2704, it could be due to low tire air pressure, damaged steering gear bellows boot, contaminated gear/rack, inner tie rods, or steering gear internal failure. To fix this issue, check the possible causes mentioned above, visually inspect the related wiring harness and connectors, and look for damaged components or broken, bent, pushed out, or corroded connector’s pins.
If you notice the engine light ON or Service Engine Soon Warning Light, it could be due to the P2704 fault code. The possible causes include low tire air pressure, damaged steering gear bellows boot, contaminated gear/rack, inner tie rods, or steering gear internal failure. To fix it, visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
While low tire air pressure is a potential cause of the P2704 fault code, there are other factors that need to be considered. Damaged steering gear bellows boot, contaminated gear/rack, inner tie rods, and steering gear internal failure can also trigger the engine light or service engine soon warning light. To fix the issue, it is important to check all possible causes, visually inspect the related wiring harness and connectors, and look for damaged components or corroded connector pins.
Wrap Up
If your engine light is on due to the P2704 fault code, check for low tire air pressure, damaged steering gear bellows boot, contaminated gearrack, inner tie rods, or steering gear internal failure.
Visually inspect the wiring harness and connectors for damage and check for broken, bent, pushed out, or corroded connector pins.
