The OBD code P24C6 indicates an issue with the Particulate Matter Sensor in the exhaust system.
Symptoms include the Engine Light being ON.
Causes may include a faulty sensor, wiring harness issues, or a malfunctioning Engine Control Module.
This code should be addressed promptly to prevent potential damage to the emissions system.
A possible fix involves inspecting and repairing any damaged components or connections related to the sensor.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the p24c6 OBD Code
The vehicle may experience a lack of power or poor acceleration with fault code P24C6.
- Symptoms: Engine Light ON.
- Reduced engine performance.
- Noise from the exhaust system.
Causes of the p24c6 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible reasons for fault code P24C6 include issues with the diesel particulate filter system.
- P24C6 can be caused by a Faulty Particulate Matter Sensor.
- A Particulate Matter Sensor harness that is open or shorted.
- A Particulate Matter Sensor circuit with poor electrical connection.
- A Faulty Engine Control Module (ECM).
Fixing Error Code p24c6 Step By Step
To resolve fault code P24C6, inspect and potentially replace the diesel particulate filter pressure sensor.
- To fix OBDII code P24C6, start by reviewing the possible causes related to this code.
- Visually inspect the wiring harness and connectors associated with the exhaust gas temperature sensor.
- Check for any damaged components and ensure the connector pins are not broken, bent, pushed out, or corroded.
- If any issues are found during the inspection, repair or replace the damaged wiring or connectors as necessary.
- Clear the fault code from the vehicle’s computer using a scan tool.
- Test drive the vehicle to see if the code returns.
- If the code persists, consider replacing the exhaust gas temperature sensor itself.
Cost Of Fixing p24c6 Fault Code
Diagnosing and repairing fault code P24C6 may involve inspecting and replacing the exhaust gas temperature sensor.
The cost to diagnose and fix OBD code P24C6 typically ranges from $75 to $150, based on an estimated repair time of 1. 0 hour.
Factors like shop rates and complexity of the repair can influence the final cost.
Details of the p24c6 OBD Code
P24C6 code indicates a fault in the diesel particulate filter pressure sensor circuit.
OBD code P24C6 means that the Diesel Particulate Filter (DPF) restriction Ash Accumulation is above the threshold.
This code is triggered by the Engine Control Module (ECM) based on data from the DPF pressure sensor or differential pressure sensor.
The signal or system involved is related to the DPF system, which monitors the level of ash accumulation in the filter.
Mechanic’s Tech Notes
This code indicates an issue with the crankshaft position sensor on the vehicle.
To diagnose and fix OBDII code P24C6, start by checking the transmission control module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection can help identify and address potential issues causing the P24C6 fault code.
FAQ
OBD code P24C6 indicates an issue with the Particulate Matter Sensor. Check sensor, wiring harness, connectors, and ECM for faults. Inspect for damage or corrosion.
Common symptoms for OBD code P24C6 include Engine Light ON. Causes may be a faulty Particulate Matter Sensor or related wiring issues. Inspect and repair as needed.
Diagnose and repair OBD code P24C6 by checking the Particulate Matter Sensor, its harness, and ECM for faults. Inspect wiring for damage or poor connections.
Wrap Up
If your vehicle displays OBDII code p24c6, you may experience issues with the diesel particulate filter (DPF) system, such as poor engine performance, reduced fuel efficiency, or black smoke from the exhaust.
This code typically indicates a problem with the DPF pressure sensor circuit, which could be caused by a faulty sensor, damaged wiring, or poor electrical connections.
To address OBDII code p24c6, start by inspecting the DPF pressure sensor and its wiring harness for any signs of damage or corrosion.
Test the sensor’s functionality and check the connectors for a
