The P2138 fault code in automobiles indicates a problem with the Accelerator Pedal Position Sensor (APPS). The symptoms of this fault code include a lack of response from the accelerator pedal or a sudden loss of power while driving.
The cause of this issue could be a faulty APPS, an open or shorted APPS harness, a poor electrical connection in the APPS circuit, or a faulty Engine Control Module (ECM).
The importance of repairing this issue lies in the fact that it can lead to unsafe driving conditions. The repair difficulty is moderate, and the fix involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins. The repair time for this issue is estimated to be around 1.0 hour.
It is essential to interpret the fault code correctly to identify the root cause of the problem and fix it effectively.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
P2138: Unraveling Symptoms Of Faulty Throttle/Pedal Position Sensor
Experiencing issues with your vehicle’s throttle?
Check out these symptoms of the p2138 fault code.
- The P2138 fault code in automobiles can cause a range of symptoms, including: – Reduced engine power – Stalling or hesitation while driving – Difficulty starting the engine – Unresponsive accelerator pedal – Illuminated check engine light – Reduced fuel efficiency – Rough idling or engine misfires – Transmission shifting issues – Electrical problems, such as flickering lights or dead battery.
P2138: Culprits Behind Accelerator Pedal Position Sensor/Switch ‘d’/’e’ Voltage Correlation
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
The automobile fault code p2138 can be caused by a faulty sensor, poor electrical connection, or a malfunctioning ECM.
- The automobile fault code P2138 can be caused by a faulty Accelerator Pedal Position Sensor.
- It can also be caused by an open or shorted Accelerator Pedal Position Sensor harness.
- Another cause can be a poor electrical connection in the Accelerator Pedal Position Sensor circuit.
- Lastly, a faulty Engine Control Module (ECM) can also trigger the P2138 fault code.
Fix Code P2138: Simple Steps To Solve
To fix the p2138 automobile fault code, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.
- To fix the automobile fault code p2138, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- Ensure that all the connections are tight and secure.
- This repair should take approximately 1.0 hour.
P2138: Affordable Fix For Complex Automobiles
The automobile fault code P2138 is caused by a malfunction in the throttle or pedal position sensor.
The diagnosis process involves checking the wiring and connections of these sensors. The estimated repair time for this fault code is 1.0 hour.
The cost of fixing this issue can range from $75 to $150 per hour, depending on the auto repair shop.
Other factors that may affect the cost include the severity of the issue and the type of vehicle.
P2138: Unraveling The Symptoms Of This Auto Fault Code
The P2138 fault code is a common issue in automobiles. It is indicated by the engine light turning on or the service engine soon warning light.
This code is related to the throttle or pedal position sensor.
The P2138 code indicates that there is a problem with the throttle or pedal position sensor.
This sensor is responsible for monitoring the position of the throttle and pedal.
If there is an issue with this sensor, it can cause the engine to run poorly or even stall.
If you see the engine light turn on or the service engine soon warning light, it is important to have your vehicle checked by a professional.
They will be able to diagnose the issue and provide a solution.
Ignoring the P2138 code can lead to further damage to your vehicle and potentially dangerous driving conditions.
FAQ
The P2138 fault code in automobiles can be caused by a faulty Accelerator Pedal Position Sensor, an open or shorted harness, poor electrical connection in the circuit, or a faulty Engine Control Module (ECM). To fix this issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
To fix the P2138 fault code, one should visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This fault code can be caused by a faulty Accelerator Pedal Position Sensor, an open or shorted Accelerator Pedal Position Sensor harness, a poor electrical connection in the Accelerator Pedal Position Sensor circuit, or a faulty Engine Control Module (ECM). Check the “Possible Causes” listed above to determine the root cause of the issue.
While a faulty Engine Control Module (ECM) is listed as a possible cause of the P2138 fault code, it is not a common cause. The most common cause of this code is a faulty Accelerator Pedal Position Sensor or issues with its wiring and connections. To fix the issue, it is recommended to visually inspect the wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
To fix the P2138 fault code, check for a faulty Accelerator Pedal Position Sensor, open or shorted harness, poor electrical connection, or a faulty Engine Control Module.
Visually inspect the wiring harness and connectors for damage or corrosion. Look for broken, bent, or pushed out connector pins.