If you’re experiencing an illuminated Engine Light or Service Engine Soon Warning Light, it could be due to the P2137 fault code. This code indicates a problem with the Accelerator Pedal Position Sensor or Electric Throttle Control Actuator. The cause could be an open or shorted harness, poor electrical connection, or a faulty sensor or actuator.
It’s important to visually inspect the wiring harness and connectors for any damage or corrosion. The repair time for this fault code is estimated at 1.0, and it’s crucial to address the issue promptly to avoid further damage to your vehicle. To interpret the fault code, check the “Possible Causes” listed above and follow the recommended fix.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
P2137: Unresponsive Accelerator Pedal – Symptoms Explained
If you notice the Engine Light ON (or Service Engine Soon Warning Light), it could be due to the p2137 fault code.
Here are the symptoms to look out for:
- The P2137 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
- Other symptoms may include reduced engine power, hesitation or stalling while driving, difficulty starting the engine, and unresponsive accelerator pedal.
- Additionally, the vehicle may experience poor fuel economy, rough idling, or a decrease in overall performance.
- It is important to address these symptoms promptly to prevent further damage to the vehicle and ensure safe driving conditions.
Decoding P2137: Common Culprits
P2137 fault code can be caused by various issues such as open harness, poor connection, or faulty sensors and actuators.
- The automobile fault code P2137 can be caused by various factors.
- These include an open or shorted Accelerator Pedal Position Sensor harness, a poor electrical connection in the Accelerator Pedal Position Sensor circuit, a faulty Accelerator Pedal Position Sensor, and a faulty Electric Throttle Control Actuator.
- All of these factors can contribute to the occurrence of the P2137 fault code in an automobile.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Fix Code P2137: Simple Steps To Get Your Car Running
To fix the p2137 automobile fault code, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.
- To fix the automobile fault code p2137, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P2137: Diagnosing Cost & Complexity For Your Car
The fault code P2137 is related to the throttle or pedal position sensor.
The diagnosis involves checking the wiring and connections of the sensor, as well as testing the sensor itself. The fixing cost will depend on the severity of the issue and the repair time required.
The estimated repair time for this fault code is 1.0 hour.
Most auto repair shops charge between $75 and $150 per hour, which will affect the overall fixing cost.
It is important to address this issue promptly to avoid further damage to the vehicle and ensure safe driving.
P2137: Throttle/Pedal Position Sensor/Switch B Circuit Range/Performance
The P2137 code is related to the Accelerator Pedal Position (APP) sensor.
The sensor has two pedal position signals, APP and APP2, which have a positive slope but increase at different rates.
The PCM determines if a signal is incorrect by calculating where it should be, inferred from the other signals. If the APP sensor inputs APP1 and APP2 disagree on the position of the accelerator pedal by more than an expected value, the P2137 code is set.
This code indicates a ThrottlePedal Position SensorSwitch ‘BC’ Voltage Correlation issue.
FAQ
If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to the P2137 fault code. This code is caused by an open or shorted Accelerator Pedal Position Sensor harness, poor electrical connection in the Accelerator Pedal Position Sensor circuit, a faulty Accelerator Pedal Position Sensor, or a faulty Electric Throttle Control Actuator. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing the P2137 fault code, which is indicated by the Engine Light ON or Service Engine Soon Warning Light, you can visually inspect the wiring harness and connectors related to the issue. The possible causes of this fault code include an open or shorted Accelerator Pedal Position Sensor harness, poor electrical connection in the Accelerator Pedal Position Sensor circuit, a faulty Accelerator Pedal Position Sensor, or a faulty Electric Throttle Control Actuator. To fix the issue, check the possible causes listed above and visually inspect the related wiring harness and connectors for damaged components, broken, bent, pushed out, or corroded connector’s pins.
If you encounter damaged components or broken, bent, pushed out, or corroded connector’s pins related to the P2137 fault code, follow these steps. First, check the possible causes listed above. Then, visually inspect the related wiring harness and connectors. Finally, look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
Wrap Up
If your engine light is on and showing the P2137 code, it could be due to a faulty Accelerator Pedal Position Sensor or Electric Throttle Control Actuator.
Check the wiring harness and connectors for any damage or corrosion.
Visually inspect the components and connector pins for any issues.
