If you’re experiencing a lack of response from your throttle pedal and your engine light is on, it could be due to the P2122 fault code. This code indicates a problem with the Accelerator Pedal Position (APP) Sensor or its circuitry.
The cause could be a faulty sensor, an open or shorted harness, or a poor electrical connection. It’s important to address this issue promptly as it can affect your vehicle’s performance and fuel efficiency.
The repair time for this issue is estimated at 1.0, and it’s recommended to visually inspect the wiring harness and connectors for any damage or corrosion.
To interpret the fault code, you can use an OBD-II scanner or take your vehicle to a mechanic.Repair Importance Level 10.0 (Out of 10) Estimated Repair Time Approximately 1.0 hour Repair Difficulty Level 6.67 (Out of 10)
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
P2122: Unresponsive Accelerator Pedal – Symptoms & Solutions
If you’re experiencing an illuminated engine light and unresponsive throttle pedal, read on to learn more about the symptoms of the p2122 automobile fault code.
- The automobile fault code P2122 has two main symptoms.
- The first symptom is that the engine light turns on.
- The second symptom is that there is no response from the throttle pedal.
- These symptoms are important to note as they can indicate a problem with the throttle position sensor or the wiring associated with it.
- It is important to address this issue as soon as possible to prevent further damage to the vehicle.
P2122: Faulty Throttle Position Sensor Triggers Check Engine Light
The automobile fault code P2122 can be caused by a faulty APP sensor, open or shorted harness, poor electrical connection, or a faulty PCM.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- The automobile fault code P2122 can be caused by a faulty Accelerator Pedal Position (APP) Sensor.
- It can also be caused by an open or shorted Accelerator Pedal Position (APP) Sensor harness.
- Another cause can be a poor electrical connection in the Accelerator Pedal Position (APP) Sensor circuit.
- Lastly, a faulty Powertrain Control Module (PCM) can also cause the P2122 fault code.
Fixing P2122: Simple Steps To Solve The Issue
To fix the p2122 automobile fault code, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.
- To fix the automobile fault code p2122, you need to check the possible causes listed above.
- Visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
P2122: Affordable Fix For Your Car’s Throttle Control System
The automobile fault code P2122 indicates a problem with the throttle or pedal position sensor.
The estimated repair time for this issue is 1.0 hour. The cost of fixing this issue can vary depending on the auto repair shop, but it is common for them to charge between $75 and $150 per hour. Other factors that may influence the cost include the severity of the issue, the type of vehicle, and the location of the repair shop.
P2122: Throttle/Pedal Position Sensor/Switch ‘d’ Circuit Low
The P2122 code refers to a problem with the ThrottlePedal Position SensorSwitch ‘D’ Circuit.
The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator.
There are 2 pedal position signals in the sensor, APP and APP2, which have a positive slope but are offset and increase at different rates. If a concern is present with one of the circuits, the other input is used.
The pedal position signal is converted to pedal travel degrees by the PCM, which is the input to the torque based strategy. The P2122 code indicates that the ThrottlePedal Position SensorSwitch ‘D’ Circuit is low, meaning there is likely an issue with the sensor or its wiring.
FAQ
If you’re experiencing the P2122 fault code in your automobile, you may notice that the engine light is on and there’s no throttle pedal response. This could be due to a faulty Accelerator Pedal Position (APP) Sensor, an open or shorted APP Sensor harness, a poor electrical connection in the APP Sensor circuit, or a faulty Powertrain Control Module (PCM). To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
If you’re experiencing an engine light or service engine soon warning light, along with no throttle pedal response, it could be due to a faulty Accelerator Pedal Position (APP) Sensor or a poor electrical connection. To fix this, check the possible causes listed above and visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
If you see the Engine Light ON or Service Engine Soon Warning Light and there is no throttle pedal response, it could be due to the P2122 fault code. This code is caused by a faulty Accelerator Pedal Position (APP) Sensor, an open or shorted APP Sensor harness, a poor electrical connection in the APP Sensor circuit, or a faulty Powertrain Control Module (PCM). To fix this issue, check the possible causes listed above, visually inspect the related wiring harness and connectors, and look for damaged components or corroded connector pins.
Wrap Up
If you experience no throttle pedal response and the engine light is on, it could be due to a faulty Accelerator Pedal Position (APP) Sensor or a poor electrical connection.
To fix this, visually inspect the wiring harness and connectors for damage and check for broken or corroded pins.
