The OBD code P1BC1 indicates an issue with the Hybrid/Electric Vehicle Battery Interface Control Module.
Symptoms include the Engine Light being ON.
The cause is often a faulty Hybrid/Electric Vehicle Battery Pack or the Control Module itself.
This is a serious issue that requires immediate attention.
To fix it, inspect the wiring harness, connectors, and components for any damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the p1bc1 OBD Code
The vehicle may experience issues related to the hybrid battery system with fault code P1BC1.
- Symptoms: Engine Light ON.
- Possible lack of power during acceleration.
- Rough idle.
- Engine stalling at low speeds.
- Engine may run rough or hesitate during acceleration.
Causes of the p1bc1 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code P1BC1 include issues with the hybrid battery system.
- P1BC1 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack.
- A faulty Hybrid/Electric Vehicle Battery Interface Control Module.
Fixing Error Code p1bc1 Step By Step
Address the issue by inspecting the wiring harness and connectors for any damage or corrosion.
- To fix OBDII code P1BC1, first, review the possible causes mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the sensor or module related to the code for proper operation and connection.
- Perform any necessary repairs or replacements on the faulty sensor or module.
- Clear the fault code using a scan tool and test drive the vehicle to verify that the issue has been resolved.
Cost Of Fixing p1bc1 Fault Code
Diagnosing and repairing fault code P1BC1 may involve inspecting and replacing the transmission control module.
The cost to diagnose and fix OBD code P1BC1 depends on the estimated 1. 0hour repair time.
Labor rates range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity of the issue can affect the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the p1bc1 OBD Code
Fault code P1BC1 relates to the hybrid powertrain control module in hybrid vehicles.
OBD code P1BC1 means Hybrid Battery Pack Cooling Fan 1 Control Circuit Low.
This code is triggered when the powertrain control module (PCM) detects a low voltage condition in the control circuit for the cooling fan 1 of the hybrid battery pack.
The signal or system involved is related to the control circuit that manages the operation of the cooling fan responsible for maintaining the optimal temperature of the hybrid battery pack.
Mechanic’s Tech Notes
This fault code indicates an issue with the hybrid battery cooling system.
To diagnose and fix OBDII code P1BC1, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.
This thorough inspection can help identify and address any issues causing the P1BC1 fault code.
FAQ
OBD code P1BC1 indicates an issue with the Hybrid/Electric Vehicle Battery Pack or Interface Control Module. Check wiring, connectors, and components for damage.
Common symptoms for fault code P1BC1 include Engine Light ON, caused by issues with the Hybrid/Electric Vehicle Battery Pack or Interface Control Module. Inspect wiring, connectors, and components for damage.
Diagnose and repair OBD code P1BC1 by checking for a faulty hybrid/electric vehicle battery pack or interface control module. Inspect wiring harness and connectors for damage.
Wrap Up
If your vehicle displays OBDII code p1bc1 along with erratic shifting, it may indicate a fault in the transmission fluid pressure sensor ‘C’ circuit.
Possible causes include sensor failure, wiring problems, or poor connections.
To address OBDII code p1bc1, start by inspecting the wiring harness and connectors related to the transmission fluid pressure sensor ‘C.
‘ Look for any damaged wires, loose connections, or corrosion.
Test the sensor itself for proper operation and replace if necessary to resolve the issue.
