The automobile fault code P1822 indicates a problem with the Internal Mode Switch (IMS). The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light. The cause of this fault code can be a faulty IMS, an open or shorted IMS harness, or a poor electrical connection in the IMS circuit.
To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins in the connectors.
The repair time for this issue is estimated to be around 1.0 hour. It is important to address this problem promptly to prevent further damage to the vehicle.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 10.0 (Out of 10) |
Unveiling The Mystery: Symptoms Of Fault Code P1822 Revealed!
If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to the p1822 fault code.
- The symptoms of the automobile fault code P1822 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P1822?
The automobile fault code p1822 can be caused by a faulty Internal Mode Switch (IMS), an open or shorted IMS harness, or a poor electrical connection in the IMS circuit.
- The fault code P1822 can be caused by the following: a faulty Internal Mode Switch (IMS), an open or shorted Internal Mode Switch (IMS) harness, or a poor electrical connection in the Internal Mode Switch (IMS) circuit.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Fixing Code P1822: Simple Steps To Resolve The Issue
To fix the automobile fault code p1822, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code P1822, follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P1822 – Cost And Complexity Unveiled!
The factors influencing the cost of diagnosing and fixing the automobile fault code P1822 are the estimated repair time of 1.0 hour and the typical auto repair shop charges of $75 to $150 per hour.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
P1822 Fault Code: Understanding The Transmission Pressure Switch Circuit
The P1822 fault code refers to the Internal Mode Switch Circuit ‘B’ being detected as low by the Powertrain Control Module (PCM).
This occurs when the engine has been running for over 5 seconds, the system voltage is between 8-18v, the Fuel Cutoff is inactive, and the engine torque is between 30-148 ft-lb (40-200 Nm).
The PCM detects that the Internal Mode Switch (IMS) signal indicated PARK for 2 seconds, and then the IMS indicated a transitional state between D2 and D1 for 5 seconds. This fault code indicates an issue with the circuitry of the Internal Mode Switch, which is responsible for indicating the gear position to the PCM.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P1822 might be the culprit. This code is often caused by a faulty Internal Mode Switch (IMS), an open or shorted IMS harness, or a poor electrical connection in the IMS circuit. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes listed above for a more comprehensive solution.
If you’re dealing with the P1822 fault code and your engine light is on, it’s time to take a closer look at the wiring harness and connectors. The possible causes include a faulty Internal Mode Switch (IMS), an open or shorted IMS harness, or a poor electrical connection in the IMS circuit. To fix the issue, visually inspect the wiring harness and connectors for any signs of damage. Pay attention to broken, bent, pushed out, or corroded pins on the connectors. This step will help you identify and address any issues with the wiring.
When resolving the P1822 fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. These issues can cause a poor electrical connection or an open or shorted circuit in the Internal Mode Switch (IMS) system, which is a common cause of the fault code. By thoroughly checking for these issues, you can identify and resolve the problem effectively.

Wrap Up
If your engine light is on and you’re seeing the P1822 fault code, it could be due to a faulty Internal Mode Switch (IMS) or issues with the IMS harness.
To fix this, visually inspect the wiring harness and connectors for any damage. Check for broken, bent, pushed out, or corroded pins on the connectors. Take action now to prevent further problems.