The automobile fault code P173B indicates a problem with the Engine Coolant Temperature Sensor. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light. The cause of this fault code can be a faulty sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit.
To fix this issue, you should visually inspect the wiring harness and connectors for any damage.
Look for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this problem is estimated to be around 1.0 hour. It is important to address this issue promptly to prevent further damage to the engine.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Decode The Symptoms: Unveiling The P173B Fault Code Mystery!
If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to the p173b fault code.
- The symptoms of the automobile fault code P173B include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P173B?
The automobile fault code p173b can be caused by a faulty engine coolant temperature sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit.
- The fault code P173B can be caused by the following: 1.
- Faulty Engine Coolant Temperature Sensor.
- 2.
- Engine Coolant Temperature Sensor harness is open or shorted.
- 3.
- Engine Coolant Temperature Sensor circuit has a poor electrical connection.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Fixing Code P173B: Simple Steps To Get Your Car Running Smoothly!
To fix the automobile fault code p173b, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code P173B, follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P173B – Cost And Complexity Unveiled!
The factors influencing the cost of diagnosing and fixing the automobile fault code p173b are the estimated repair time of 1.0 hour and the typical auto repair shop charges of $75 to $150 per hour.
P173B Fault Code: Unveiling The Mystery Behind Your Automobile’s Transmission Issue
The P173B fault code is related to the Engine Coolant Temperature Sensor in your vehicle. The Engine Control Module (ECM) constantly monitors this sensor to ensure it is functioning properly.
When the ECM detects that the Engine Coolant Temperature Sensor is not within the factory specifications, it sets the P173B code.
This code indicates an invalid reading from the sensor, which can affect the engine’s performance and overall efficiency.
It is important to address this issue promptly to prevent further damage to your vehicle.
FAQ
If you see the engine light on or the service engine soon warning light, the fault code P173B could be the culprit. This code is often caused by a faulty engine coolant temperature sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes mentioned above to ensure a thorough diagnosis.
To fix the P173B fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This can help identify if the Engine Coolant Temperature Sensor harness is open or shorted, or if there is a poor electrical connection in the circuit. Don’t forget to check the “Possible Causes” listed above for further troubleshooting.
When resolving the P173B fault code, start by checking for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. By doing this, you can identify any issues with the Engine Coolant Temperature Sensor or its circuit connection, which may be causing the engine light to turn on.
Wrap Up
If your engine light is on, it could be due to a faulty Engine Coolant Temperature Sensor or issues with the sensor’s harness or circuit connection. To fix this, visually inspect the wiring harness and connectors for any damage.
Check for broken, bent, pushed out, or corroded pins on the connectors.
