The automobile fault code P1711 indicates a problem with the Transmission Fluid Temperature (TFT) Sensor. This can be identified by the Engine Light or Service Engine Soon Warning Light turning on. The cause of this fault code could be a faulty TFT Sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit.
To fix this issue, it is recommended to visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors.
The repair time for this issue is estimated to be around 1.0.
To interpret the fault code, it is important to check the “Possible Causes” listed above and perform the necessary inspections and repairs.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
P1711 Fault Code Symptoms: Unveiling The Telltale Signs Of Trouble
If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to the p1711 fault code.
- The symptoms of the automobile fault code P1711 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P1711?
The automobile fault code p1711 can be caused by a faulty Transmission Fluid Temperature (TFT) Sensor, an open or shorted harness, or a poor electrical connection in the sensor circuit.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- The fault code P1711 can be caused by the following: 1.
- Faulty Transmission Fluid Temperature (TFT) Sensor.
- 2.
- Transmission Fluid Temperature Sensor harness is open or shorted.
- 3.
- Transmission Fluid Temperature Sensor circuit poor electrical connection.
Fixing Code P1711: Simple Steps To Resolve The Issue
To fix the automobile fault code p1711, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code P1711, you need to follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- 5.
- Repairing this fault code is estimated to take approximately 1.0 hour.
Cracking The Code: P1711 – Cost And Complexity Unveiled!
The factors influencing the cost of diagnosing and fixing the automobile fault code P1711 are the estimated repair time of 1.0 hour and the typical hourly rate charged by auto repair shops, which ranges between $75 and $150.
P1711 Fault Code: Understanding The Transmission System Malfunction
When it comes to the P1711 fault code, it means that the Transmission Fluid Temperature Sensor is out of the self-test range.
This code is detected by the Powertrain Control Module (PCM) when the sensor’s readings are either too high or too low. It is important to note that this fault code is related to the transmission system of the vehicle. The Transmission Fluid Temperature Sensor plays a crucial role in monitoring the temperature of the transmission fluid, which is essential for the proper functioning of the transmission system.
If this sensor is not within the self-test range, it can lead to issues with the transmission’s performance and overall vehicle operation.
FAQ
If you’re seeing the p1711 fault code and your engine light is on, it could be due to a faulty Transmission Fluid Temperature (TFT) Sensor, an open or shorted TFT Sensor harness, or a poor electrical connection in the TFT Sensor circuit. To visually inspect these possible causes, check the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins in the connectors. Make sure to address any issues you find to fix the problem.
If you’re experiencing the dreaded p1711 fault code, it could be due to a faulty Transmission Fluid Temperature (TFT) Sensor. This can cause your engine light to come on or trigger a service engine soon warning. To fix it, start by checking the possible causes mentioned above. Take a close look at the wiring harness and connectors, making sure there are no visible signs of damage. Also, check for any broken, bent, pushed out, or corroded pins on the connectors.
When inspecting the wiring harness and connectors related to the p1711 fault code, it is important to visually inspect them for any damage or poor electrical connections. Look for any broken, bent, pushed out, or corroded pins on the connectors. Check for damaged components as well. By carefully examining these elements, you can determine if they are the cause of the fault code and take appropriate action to fix the issue.
Wrap Up
If your engine light is on and you’re seeing the P1711 fault code, it could be due to a faulty Transmission Fluid Temperature (TFT) Sensor or issues with the sensor’s wiring. To fix it, visually inspect the wiring harness and connectors, checking for any damage or corrosion.
Look out for broken or bent pins as well.
