The automobile fault code P1704 indicates a problem with the Transmission Control Module (TCM). The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light. The cause of this fault code can be a faulty TCM, an open or shorted TCM harness, or a poor electrical connection in the TCM circuit.
To fix this issue, it is recommended to visually inspect the wiring harness and connectors, checking for any damaged components or broken, bent, pushed out, or corroded connector pins. The repair time for this fault code is estimated to be 1.0. To interpret the fault code, it is important to check the “Possible Causes” listed above and perform the necessary inspections and repairs.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
P1704 Fault Code Symptoms: Unveiling The Telltale Signs Of Trouble
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1704 fault code.
- The symptoms of the automobile fault code P1704 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unveiling The Culprits: Demystifying The Causes Of Code P1704
The automobile fault code p1704 can be caused by a faulty Transmission Control Module (TCM), an open or shorted TCM harness, or a poor electrical connection in the TCM circuit.
- The fault code P1704 can be caused by the following: a faulty Transmission Control Module (TCM), an open or shorted Transmission Control Module harness, and a poor electrical connection in the Transmission Control Module circuit.
Fixing Code P1704: Simple Steps To Resolve The Issue
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
To fix the p1704 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code P1704, follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P1704 Fixing Cost And Complexity Unveiled!
The factors influencing the cost of diagnosing and fixing the automobile fault code P1704 are the estimated repair time of 1.0 hour and the typical auto repair shop charges of $75 to $150 per hour.
P1704 Fault Code: Understanding The Description And Troubleshooting Tips
The P1704 fault code relates to the Transmission Control Module (TCM) in your vehicle.
The TCM is responsible for controlling the transmission solenoids and valves. It receives signals from various sensors, such as the Park & Neutral Position (PNP) Switch, Vehicle Speed Sensor (VSS), and Accelerator Pedal Position (APP) Sensor.
When the TCM’s memory Electrically Erasable Programmable Read Only Memory (EEPROM) malfunctions, it triggers the P1704 code. This code indicates that there is an issue with the TCM’s memory, which can affect the proper functioning of the transmission system. It is important to address this fault code promptly to ensure smooth and reliable transmission operation.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P1704 could be the culprit. This code is often caused by a faulty Transmission Control Module (TCM), an open or shorted TCM harness, or a poor electrical connection in the TCM circuit. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes listed above for further troubleshooting.
To fix the P1704 fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if the connectors’ pins are broken, bent, pushed out, or corroded. This can help identify any issues with the Transmission Control Module (TCM) or if the TCM harness is open or shorted. Don’t forget to check the “Possible Causes” listed above for further troubleshooting.
When resolving the P1704 fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. These issues can cause a poor electrical connection or an open or shorted circuit in the Transmission Control Module (TCM) harness. By checking for these problems, you can address the root cause of the fault code and prevent further issues.

Wrap Up
If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Transmission Control Module (TCM), an open or shorted TCM harness, or a poor electrical connection in the TCM circuit. To fix this, visually inspect the wiring harness and connectors, checking for any damage or corrosion.
Also, look out for broken, bent, pushed out, or corroded connector pins.