The automobile fault code P1659 indicates a problem with the Electronic Throttle Control System (ETCS) Relay.
Symptoms may include issues with the throttle response or engine performance. The cause could be a faulty ETCS relay, an open or shorted relay harness, a poor electrical connection in the relay circuit, or a faulty Powertrain Control Module (PCM). To fix the issue, visually inspect the wiring harness and connectors for any damage.
Check for broken, bent, pushed out, or corroded pins in the connectors.
The repair time for this issue is estimated to be around 1.0 hour.
To interpret the fault code, check the “Possible Causes” listed above and perform the necessary inspections and repairs.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Decode The Symptoms Of Code P1659: Unveiling The Automotive Mystery
Experiencing engine misfires, poor acceleration, and difficulty starting? Check out the symptoms of fault code P1659 below.
- The symptoms of the automobile fault code P1659 include: engine misfire, rough idle, hesitation or stumbling during acceleration, reduced power and performance, illuminated check engine light, difficulty starting the vehicle, and potential stalling while driving.
Unraveling The Mystery: What Causes Fault Code P1659?
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
The automobile fault code p1659 can be caused by a faulty ETCS relay, an open or shorted ETCS relay harness, a poor electrical connection in the ETCS relay circuit, or a faulty PCM.
- The fault code P1659 can be caused by a faulty Electronic Throttle Control System (ETCS) Relay, an open or shorted Electronic Throttle Control System Relay harness, a poor electrical connection in the Electronic Throttle Control System Relay circuit, or a faulty Powertrain Control Module (PCM).
Fixing Code P1659: Simple Steps To Resolve The Issue!
To fix the p1659 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code P1659, follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P1659 – Cost And Complexity Unveiled!
The factors influencing the diagnosis and fixing cost of the automobile fault code P1659 are the estimated repair time of 1.0 hour and the average hourly rate charged by auto repair shops, which ranges between $75 and $150.
Decode P1659: Unveiling Symptoms And Solutions
When you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to the fault code P1659. This code indicates a problem with the engine coolant thermostat control circuit. It means that the engine’s temperature is not being regulated properly, which can lead to overheating or poor performance.
Ignoring this issue can cause further damage to your engine and result in costly repairs.
It’s important to address this fault code promptly to ensure the optimal functioning of your vehicle and prevent any potential breakdowns on the road.
FAQ
The fault code P1659 in an automobile can be caused by a few different factors. One possible cause is a faulty Electronic Throttle Control System (ETCS) Relay. It could also be due to an open or shorted ETCS Relay harness, a poor electrical connection in the ETCS Relay circuit, or a faulty Powertrain Control Module (PCM). To fix this issue, it is recommended to visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look out for broken, bent, pushed out, or corroded pins in the connectors.
To fix fault code P1659, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This will help identify any issues with the Electronic Throttle Control System (ETCS) Relay or the Powertrain Control Module (PCM). By checking these possible causes, you can take the necessary steps to resolve the fault code.
To resolve fault code P1659, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. This could indicate a faulty Electronic Throttle Control System (ETCS) Relay or a poor electrical connection in the ETCS Relay circuit. Additionally, check the Powertrain Control Module (PCM) for any faults. By thoroughly examining these possible causes, you can identify and address the issue effectively.
Wrap Up
To fix the p1659 fault code, start by visually inspecting the wiring harness and connectors. Look for any damage or corrosion.
Check the Electronic Throttle Control System (ETCS) Relay and its circuit for any open or shorted connections. Lastly, ensure the Powertrain Control Module (PCM) is functioning properly.
