The automobile fault code P1573 indicates a problem with the Throttle Position Sensor (TPS). When this code is triggered, the Engine Light or Service Engine Soon Warning Light will turn on. The most common cause of this fault code is a faulty TPS, but it can also be caused by an open or shorted TPS harness or a poor electrical connection in the TPS circuit.
To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors. The repair for this fault code is relatively straightforward and should take about 1.0 hour.
To interpret the fault code, refer to the “Possible Causes” listed above and follow the recommended steps for inspection and repair.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Unveiling The Symptoms Of Fault Code P1573: A Comprehensive Guide
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1573 fault code.
- The symptoms of the automobile fault code p1573 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P1573?
The automobile fault code p1573 can be caused by a faulty Throttle Position Sensor, an open or shorted Throttle Position Sensor harness, or a poor electrical connection in the Throttle Position Sensor circuit.
- The fault code P1573 can be caused by a faulty Throttle Position Sensor.
- It can also be caused by an open or shorted Throttle Position Sensor harness.
- Additionally, a poor electrical connection in the Throttle Position Sensor circuit can also trigger this fault code.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Fixing Code P1573: Simple Steps To Resolve The Issue
To fix the automobile fault code p1573, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p1573, you need to follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- 5.
- Repairing this fault code is estimated to take approximately 1.0 hour.
Cracking The Code: P1573 – Cost And Complexity Unveiled!
The automobile fault code P1573 can be diagnosed and fixed within an estimated repair time of 1.0 hour.
The cost of the repair will depend on the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.
P1573 Fault Code: Understanding The Description And Troubleshooting Steps
The P1573 fault code indicates that the Powertrain Control Module (PCM) is unable to determine the position of the throttle. This code is specifically related to the throttle position sensor and its ability to return to the default or “limp home” position.
The PCM constantly tests the electronic throttle to ensure it can move freely from both the open and closed positions. When the PCM detects that the throttle position is not available or cannot be determined, it triggers the P1573 fault code. This code can lead to issues with engine performance and should be addressed promptly to avoid further damage.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P1573 could be the culprit. This code is often caused by a faulty throttle position sensor, an open or shorted throttle position sensor harness, or a poor electrical connection in the throttle position sensor circuit. To fix this issue, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Also, look out for broken, bent, pushed out, or corroded connector pins.
If you’re dealing with the p1573 fault code and your engine light is on, it’s likely due to a faulty throttle position sensor or issues with the wiring harness and connectors. To fix this, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are pushed out. This step is crucial in identifying any issues that may be causing the fault code.
When resolving the p1573 fault code, start by checking for damaged components and connector’s pins. This fault code is often caused by a faulty Throttle Position Sensor or issues with the sensor’s harness and circuit connection. To fix the problem, visually inspect the wiring harness and connectors, paying close attention to any signs of damage. Look for broken, bent, pushed out, or corroded pins on the connectors. By addressing these potential issues, you can effectively resolve the fault code and get your engine running smoothly again.
Wrap Up
If your engine light is on, it could be due to a faulty Throttle Position Sensor or issues with the sensor’s wiring.
To fix this, visually inspect the wiring harness and connectors for any damage.
Check for broken, bent, pushed out, or corroded pins on the connectors.
