The automobile fault code P1467 indicates a problem with the Evaporative Emission Purge Pump. This can be identified by the Engine Light or Service Engine Soon Warning Light being illuminated. The cause of this fault code could be a faulty pump, an open or shorted harness, a poor electrical connection, or a faulty Engine Control Module (ECM).
To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage. Additionally, check for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0 hour.
It is important to address this fault code promptly to ensure proper functioning of the vehicle.
| Repair Importance Level | 3.33 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Unveiling The Symptoms Of Fault Code P1467: A Troubleshooting Guide
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1467 fault code.
- The symptoms of the automobile fault code P1467 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unveiling The Culprits: Code P1467 Possible Causes
The automobile fault code P1467 can be caused by a faulty evaporative emission purge pump, an open or shorted harness, a poor electrical connection in the purge pump circuit, or a faulty engine control module (ECM).
- The fault code P1467 can be caused by a faulty Evaporative Emission Purge Pump.
- It can also be caused by an open or shorted harness of the Evaporative Emission Purge Pump.
- Another possible cause is a poor electrical connection in the circuit of the Evaporative Emission Purge Pump.
- Lastly, a faulty Engine Control Module (ECM) can also trigger this fault code.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Fixing Code P1467: Simple Steps To Resolve The Issue
To fix the automobile fault code p1467, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code P1467, follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P1467 – Cost And Complexity Unveiled!
The automobile fault code P1467 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of the repair will depend on the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.
P1467 Fault Code: Understanding The Description And Troubleshooting Steps
The P1467 fault code refers to a problem with the EVAP Purge Pump in your vehicle. This pump is responsible for purging stored vapors from the Evaporative Emission Canister, which helps to meet emission requirements and improve fuel economy.
The Engine Control Module (ECM) monitors the speed of the purge pump and compares it to the desired speed.
If the speeds are not within the calibrated range for more than 5 seconds, the P1467 code will be triggered.
This code indicates a malfunction with the EVAP Purge Pump.
FAQ
If you see the engine light or service engine soon warning light on and you have a fault code P1467, it could be due to a few possible causes. One of the causes could be a faulty evaporative emission purge pump. Another cause could be an open or shorted harness for the evaporative emission purge pump. It’s also possible that there is a poor electrical connection in the circuit. Lastly, a faulty engine control module (ECM) could be the culprit. To fix this issue, you should visually inspect the wiring harness and connectors related to the problem. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
If you’re dealing with the P1467 fault code and your engine light is on, it’s time to take action. The culprit could be a faulty Evaporative Emission Purge Pump or issues with the wiring harness and connectors. To fix this, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or corroded pins. Don’t forget to check for any components that may be bent or pushed out of place. By addressing these potential causes, you’ll be one step closer to resolving the issue.
When resolving the P1467 fault code, start by checking for damaged components and connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded connector pins. By doing this, you can identify any issues with the Evaporative Emission Purge Pump or its circuitry, which may be causing the engine light to turn on. Don’t forget to also check the other possible causes listed above.
Wrap Up
If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Evaporative Emission Purge Pump or issues with the wiring harness and connectors. To fix it, visually inspect the wiring and connectors for any damage, and check for broken or corroded pins.
