The automobile fault code P144C indicates a problem with the Evaporative Emission (EVAP) system. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light. The cause of this fault code is a stuck open EVAP canister purge check valve or a damaged EVAP canister purge check valve.
To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Check for broken, bent, pushed out, or corroded connector pins.
The repair time for this issue is estimated to be around 1.0 hour. It is important to address this problem promptly to ensure the proper functioning of the EVAP system.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—now at a Black Friday price!
Unveiling The Mystery: Symptoms Of Fault Code P144C Revealed!
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p144c fault code.
- The symptoms of the automobile fault code p144c include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P144C?
The automobile fault code p144c can be caused by a stuck open EVAP canister purge check valve or a damaged EVAP canister purge check valve.
- The fault code p144c can be caused by a stuck open Evaporative Emission (EVAP) canister purge check valve, as well as a damaged EVAP canister purge check valve.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (BlackFriday Deal)
Fixing Code P144C: Simple Steps To Resolve The Issue!
To fix the p144c fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p144c, follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P144C – Cost And Complexity Unveiled!
The automobile fault code P144C can be diagnosed and fixed within an estimated repair time of 1.0 hour.
The cost of the repair will depend on the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.
P144C Fault Code: Understanding The Evaporative Emission System Leak Detection Pump
The P144C fault code indicates a problem with the Evaporative Emission (EVAP) canister purge check valve. The Powertrain Control Module (PCM) tests this valve for a stuck open condition.
The test is performed during minimal boost conditions, once per drive cycle, when specific entry conditions are met. If the fuel tank pressure exceeds a calibrated amount within a specified time during the test, the DTC is set. In simpler terms, this fault code means that there is an issue with the valve responsible for controlling the release of fuel vapors from the EVAP system.
FAQ
If you’re seeing the engine light or the service engine soon warning light and the fault code is P144C, it could be due to a stuck open Evaporative Emission (EVAP) canister purge check valve or a damaged EVAP canister purge check valve. To fix this issue, start by visually inspecting the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. This will help you identify and resolve the problem.
A stuck open Evaporative Emission (EVAP) canister purge check valve can contribute to the occurrence of fault code P144C. This can cause the Engine Light to turn on or the Service Engine Soon Warning Light to illuminate. The cause of this issue is a damaged EVAP canister purge check valve, which is part of the EVAP canister purge valve. To fix this problem, you should visually inspect the related wiring harness and connectors, checking for any damaged components or broken, bent, pushed out, or corroded connector pins.
To fix fault code P144C, start by checking the “Possible Causes” mentioned above. Then, visually inspect the wiring harness and connectors related to the issue. Look for any signs of damage and check if any components are broken, bent, pushed out, or have corroded connector pins. This thorough inspection will help identify any issues with the wiring or connectors that may be causing the fault code.
Wrap Up
If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a stuck open Evaporative Emission (EVAP) canister purge check valve or a damaged EVAP canister purge check valve.
To fix this, visually inspect the wiring harness and connectors for any damage, and check for broken, bent, pushed out, or corroded connector pins.
