The automobile fault code P1449 indicates a problem with the Diagnostic Module Tank Leakage (DMTL) Pump.
This can cause the Engine Light or Service Engine Soon Warning Light to turn on. The possible causes include a faulty DMTL Pump, an open or shorted DMTL Pump harness, or a poor electrical connection in the DMTL Pump circuit. To fix this issue, visually inspect the wiring harness and connectors for any damage.
Look for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0 hour.
It is important to address this problem promptly to prevent further damage to the vehicle.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
P1449 Fault Code Symptoms: Unveiling The Hidden Automotive Issues
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1449 fault code.
- The symptoms of the automobile fault code p1449 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P1449?
The automobile fault code p1449 can be caused by a faulty DMTL pump, an open or shorted DMTL pump harness, or a poor electrical connection in the DMTL pump circuit.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- The fault code P1449 can be caused by the following: a faulty Diagnostic Module Tank Leakage (DMTL) Pump, an open or shorted Diagnostic Module Tank Leakage Pump harness, and a poor electrical connection in the Diagnostic Module Tank Leakage Pump circuit.
Fixing Code P1449: Simple Steps To Resolve The Issue!
To fix the p1449 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p1449, follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P1449 Fixing Cost And Complexity Unveiled!
The factors influencing the diagnosis and fixing cost of automobile fault code p1449 are the estimated repair time of 1.0 hour and the average hourly rate charged by auto repair shops, which ranges between $75 and $150.
P1449: Understanding The Egr Valve Control Circuit Malfunction
The P1449 fault code refers to a problem with the Diagnostic Module Tank Leakage (DMTL) pump in the evaporative system of a vehicle. This system is responsible for detecting leaks in the evaporative system, which can be as small as 0.02 inches in diameter. The DMTL pump is an electrically actuated pump located at the atmospheric connection of the evaporative canister.
It performs a pressure test of the evaporative system. During the Reference Leak Measurement, the DMTL pump delivers through a reference restriction, and the engine-management system measures the pump’s electrical current consumption.
During the Leak Measurement, the DMTL pump delivers through the charcoal canister into the fuel-tank system. The pressure in the evaporative system can reach up to 2.5 kPa, depending on the fuel level in the tank.
Again, the engine-management system measures the pump’s electrical current consumption.
By comparing the currents of the reference leak measurement and the leak measurement, the engine-management system can determine if there is a leakage in the tank.
If the current is too high, it indicates a problem with the DMTL pump, triggering the P1449 fault code.
FAQ
If you’re seeing the engine light or service engine soon warning light, the fault code P1449 could be the culprit. This code is often caused by a faulty Diagnostic Module Tank Leakage (DMTL) Pump or issues with the pump’s harness and electrical connection. To visually inspect these potential causes, check the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins on the connectors. By conducting this inspection, you can get closer to finding the fix for this fault code.
If you notice that the Engine Light is ON or the Service Engine Soon Warning Light is illuminated, it could be due to a faulty Diagnostic Module Tank Leakage (DMTL) Pump. To determine if the DMTL Pump harness is open or shorted, visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. If any issues are found, address them accordingly to fix the problem.
To fix the P1449 fault code, start by checking the listed possible causes, such as a faulty Diagnostic Module Tank Leakage (DMTL) Pump or an open or shorted DMTL Pump harness. Then, visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins on the connectors. This thorough inspection will help identify and resolve the issue.
Wrap Up
If your engine light is on and you’re seeing the P1449 fault code, it could be due to a faulty Diagnostic Module Tank Leakage (DMTL) Pump or issues with the pump’s harness.
To fix it, visually inspect the wiring harness and connectors for any damage.
Also, check for broken, bent, pushed out, or corroded pins on the connectors.
