The automobile fault code P1417 indicates a problem with the engine’s oil pressure or the MDS (Multi-Displacement System) solenoid. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.
The cause could be low oil pressure, a blocked oil passage, a faulty MDS solenoid, an open or shorted MDS solenoid harness, or a poor electrical connection in the MDS solenoid circuit. To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion.
Additionally, look for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0 hour.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Unveiling The Mystery: Symptoms Of Fault Code P1417 Revealed!
When the p1417 fault code appears, you may notice the Engine Light ON or the Service Engine Soon Warning Light illuminated.
- The symptoms of the automobile fault code P1417 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P1417?
The automobile fault code p1417 can be caused by low oil pressure, a faulty MDS solenoid, an open or shorted MDS solenoid harness, a poor electrical connection in the MDS solenoid circuit, or a faulty Engine Control Module (ECM).
- The fault code P1417 can be caused by: low oil pressure or blocked oil passage, a faulty MDS solenoid, an open or shorted MDS solenoid harness, a poor electrical connection in the MDS solenoid circuit, or a faulty Engine Control Module (ECM).
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Fixing Code P1417: Simple Steps To Resolve The Issue!
To fix the p1417 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p1417, you need to follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P1417 – Cost And Complexity Unveiled!
The factors influencing the diagnosis and fixing cost of automobile fault code p1417 are the estimated repair time of 1.0 hour and the average hourly rate charged by auto repair shops, which ranges between $75 and $150.
P1417 Fault Code: Understanding The Description And Troubleshooting Tips
The P1417 fault code relates to the Cylinder 7 Reactivation Control Performance. This code is triggered when the engine is transitioning from 8 cylinder mode to 4 cylinder mode and all the necessary conditions are met.
When this code is detected, power is supplied to the MDS Solenoid, which in turn raises the oil pressure to the lifters associated with Cylinder 7. The increased oil pressure activates the locking pins, allowing the lifter to collapse and separate the valves from the camshaft. In simpler terms, the P1417 code indicates an issue with the control performance of Cylinder 7 reactivation.
It is important to address this issue promptly to ensure proper functioning of the engine and optimize fuel efficiency.
FAQ
If you see the engine light or service engine soon warning light on in your automobile, it could be due to fault code P1417. This code can be caused by low oil pressure or a blocked oil passage, a faulty MDS solenoid, an open or shorted MDS solenoid harness, a poor electrical connection in the MDS solenoid circuit, or a faulty Engine Control Module (ECM). To fix this issue, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.
If you’re dealing with fault code P1417 and your engine light is on, it’s time to visually inspect the wiring harness and connectors. This code can be caused by low oil pressure, a blocked oil passage, a faulty MDS solenoid, an open or shorted MDS solenoid harness, a poor electrical connection in the MDS solenoid circuit, or a faulty Engine Control Module (ECM). To fix the issue, check the possible causes mentioned earlier and carefully examine the wiring harness and connectors. Look out for any damaged components and check if any connector pins are broken, bent, pushed out, or corroded.
When resolving fault code P1417, start by checking for damaged components or corroded connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any broken, bent, pushed out, or corroded pins. By doing this, you can identify any issues that may be causing the engine light to turn on. Remember to also check the possible causes listed, such as low oil pressure or a faulty MDS solenoid.
Wrap Up
If your engine light is on and you’re experiencing low oil pressure or a blocked oil passage, it could be due to a faulty MDS Solenoid or issues with the solenoid harness or circuit.
To fix this, visually inspect the wiring harness and connectors for any damage, and check for broken or corroded pins.
