The automobile fault code P1360 indicates a problem with the ignition coil. When this fault code is triggered, the engine light or service engine soon warning light will turn on. The most common causes of this fault code are a faulty ignition coil, an open or shorted ignition coil harness, or a poor electrical connection in the ignition coil circuit.
To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors.
The repair time for this issue is estimated to be around 1.0 hour.
It is important to address this fault code promptly to prevent further damage to the ignition system.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Unveiling The Mystery: Symptoms Of Fault Code P1360 Revealed!
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1360 fault code.
- The symptoms of the automobile fault code p1360 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P1360?
The automobile fault code p1360 can be caused by a faulty ignition coil, an open or shorted ignition coil harness, or a poor electrical connection in the ignition coil circuit.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- The fault code P1360 can be caused by: a faulty ignition coil, an open or shorted ignition coil harness, and a poor electrical connection in the ignition coil circuit.
Fixing Code P1360: Simple Steps To Resolve The Issue!
To fix the p1360 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p1360, follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P1360 – Cost And Complexity Unveiled!
The factors influencing the cost of diagnosing and fixing the automobile fault code p1360 are the estimated repair time of 1.0 hour and the typical auto repair shop charges of $75 to $150 per hour.
P1360 Fault Code: Understanding The Description And Troubleshooting Steps
The P1360 code refers to the Ignition Control Circuit Group 2.
This is a generic description for the code, and the specific description may vary depending on the make and model of your vehicle.
Unfortunately, we do not have any additional information about this particular code at the moment. If you have any questions or need further assistance, please feel free to post your query in the comments section below. Our team will be happy to provide you with more information.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P1360 could be the culprit. This code is often caused by a faulty ignition coil, an open or shorted ignition coil harness, or a poor electrical connection in the ignition coil circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes mentioned above for a more comprehensive solution.
To fix the issue of the Engine Light being ON or the Service Engine Soon Warning Light, start by checking the possible causes, which include a faulty ignition coil, an open or shorted ignition coil harness, or a poor electrical connection in the ignition coil circuit. To visually inspect the problem, examine the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded pins in the connectors. This thorough inspection will help identify any issues and guide you towards the necessary fix.
When troubleshooting an engine light or service engine soon warning light, it’s important to check for damaged components and corroded connector pins. These issues can be the cause of faulty ignition coils, open or shorted ignition coil harness, or poor electrical connections in the ignition coil circuit. To fix the problem, visually inspect the wiring harness and connectors, paying close attention to any signs of damage. Look for broken, bent, pushed out, or corroded connector pins.
Wrap Up
If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Ignition Coil, an open or shorted Ignition Coil harness, or a poor electrical connection in the Ignition Coil circuit. To fix this, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.
