The automobile fault code P1339 indicates a problem with the Glow Plug 2 circuit. Symptoms may include difficulty starting the engine or rough idling. The cause could be a faulty Glow Plug 2, an open or shorted harness, or a poor electrical connection.
To fix this issue, visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins on the connectors.
It is important to address this problem promptly as it can affect the engine’s performance. The repair time for this issue is estimated to be around 1.0 hour.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Decode P1339: Unveiling The Symptoms Of This Automobile Fault Code
Experiencing rough idling, misfires, and a decrease in engine performance?
These could be symptoms of the automobile fault code: p1339.
- The symptoms of the automobile fault code P1339 include rough idling, engine misfires, loss of power, hesitation during acceleration, and difficulty starting the engine.
Unraveling The Mystery: What Causes Fault Code P1339?
The automobile fault code P1339 can be caused by various factors, including a faulty Glow Plug 2, an open or shorted Glow Plug 2 harness, and poor electrical connection in the Glow Plug 2 circuit.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- The fault code P1339 can be caused by the following: – Failure to perform the Glow Plug Learn procedure.
- – A faulty Glow Plug 2.
- – An open or shorted harness for Glow Plug 2.
- – Poor electrical connection in the Glow Plug 2 circuit.
Fixing Code P1339: The Ultimate Guide To Resolving The Issue
To fix the p1339 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code P1339, follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P1339 Fixing Cost And Complexity Unveiled!
The factors influencing the cost of diagnosing and fixing the automobile fault code P1339 are the estimated repair time of 1.0 hour and the typical auto repair shop charges of $75 to $150 per hour.
Decode P1339: Unveiling The Symptoms And Solutions
When you see the Engine Light ON or the Service Engine Soon Warning Light, it could be indicating a fault code of p1339. This code typically points to an issue with the Variable Valve Timing (VVT) system.
The VVT system is responsible for adjusting the timing of the engine valves to optimize performance and fuel efficiency. When the p1339 fault code appears, it means that there is a problem with the VVT system’s solenoid valve. This valve controls the flow of oil to the VVT actuator, which in turn adjusts the valve timing.
A malfunctioning solenoid valve can lead to improper valve timing, resulting in reduced engine performance and fuel economy.
To fix the p1339 fault code, the solenoid valve needs to be inspected and potentially replaced.
It is important to address this issue promptly to prevent further damage to the engine and ensure optimal performance. If you notice the Engine Light ON or the Service Engine Soon Warning Light, it is recommended to have your vehicle diagnosed by a qualified mechanic to determine the exact cause of the fault code and take appropriate action.
FAQ
If you’re seeing fault code P1339 in your automobile, there are a few possible causes to consider. One potential cause is a faulty Glow Plug 2, which may need to be replaced. Another possibility is that the Glow Plug 2 harness is open or shorted, which can disrupt the electrical connection. To fix the issue, start by visually inspecting the wiring harness and connectors for any damage. Check for broken, bent, pushed out, or corroded pins on the connectors. This will help you identify and address any issues that may be causing the fault code.
To fix fault code P1339, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This can help identify if the issue lies with a faulty glow plug, an open or shorted harness, or a poor electrical connection in the glow plug circuit. Make sure to perform the Glow Plug Learn procedure as well.
When resolving fault code P1339, it is important to check for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. By checking these possible causes, you can effectively diagnose and fix the issue.
Wrap Up
To fix the P1339 fault code, start by performing the Glow Plug Learn procedure. Next, visually inspect the wiring harness and connectors for any damage.
Check for broken, bent, pushed out, or corroded connector pins. This will help identify and resolve issues with the faulty Glow Plug 2 or any poor electrical connections.
