The automobile fault code P1336 indicates a problem with the Crankshaft Position Sensor.
Symptoms may include difficulty starting the engine, rough idling, or stalling.
The cause could be a faulty sensor, an open or shorted sensor harness, poor electrical connections, a damaged signal plate, a faulty starter motor, or issues with the starting system circuit or battery.
To fix the issue, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look for broken, bent, pushed out, or corroded pins in the connectors.
The repair time for this issue is estimated to be around 1.0 hour.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Decode P1336: Unveiling The Symptoms Of This Automobile Fault Code
Experiencing rough idling, stalling, and difficulty starting?
Check out the symptoms of fault code P1336 below.
- The symptoms of the automobile fault code P1336 include rough idling, engine misfires, hesitation or stumbling during acceleration, poor fuel efficiency, and difficulty starting the vehicle.
- Additionally, there may be a noticeable decrease in engine power, increased exhaust emissions, and the check engine light may illuminate on the dashboard.
- It is important to address these symptoms promptly to prevent further damage to the engine and ensure optimal performance of the vehicle.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Unraveling The Mystery: What Causes Fault Code P1336?
The automobile fault code p1336 can be caused by a faulty crankshaft position sensor, open or shorted sensor harness, poor electrical connection, damaged signal plate, faulty starter motor, starting system circuit, or a deadweak battery.
- The fault code P1336 can be caused by various factors, including a faulty crankshaft position sensor, an open or shorted harness for the crankshaft position sensor, a poor electrical connection in the crankshaft position sensor circuit, damage to the signal plate, a faulty starter motor, issues with the starting system circuit, and a dead or weak battery.
Fixing Code P1336: Simple Steps To Solve The Issue
To fix the p1336 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code P1336, follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P1336 – Cost And Complexity Unveiled!
The automobile fault code P1336 can be diagnosed and fixed within an estimated repair time of 1.0 hour.
The cost of the repair will depend on the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.
Decode P1336: Unveiling The Symptoms And Solutions
When you see the Engine Light ON or the Service Engine Soon Warning Light, it could be indicating a fault code of p1336.
This code specifically relates to the crankshaft position sensor.
The crankshaft position sensor is responsible for monitoring the position and speed of the crankshaft in your engine.
When this sensor malfunctions, it can lead to issues with ignition timing and engine performance.
It’s important to address this fault code promptly to avoid further damage to your engine and ensure optimal performance.
FAQ
The fault code P1336 in an automobile can be caused by a faulty Crankshaft Position Sensor, an open or shorted Crankshaft Position Sensor harness, a poor electrical connection in the Crankshaft Position Sensor circuit, a damaged signal plate, a faulty starter motor, issues with the starting system circuit, or a dead or weak battery. To fix this issue, it is recommended to visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.
To fix fault code P1336, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. Also, check the possible causes such as a faulty crankshaft position sensor, open or shorted sensor harness, poor electrical connection in the sensor circuit, damage to the signal plate, a faulty starter motor, or issues with the starting system circuit or battery.
To resolve fault code P1336, start by checking for damaged components and connector pins. Visually inspect the wiring harness and connectors, looking for any signs of damage. Pay close attention to broken, bent, pushed out, or corroded connector pins. Additionally, check the possible causes listed, such as a faulty crankshaft position sensor, open or shorted sensor harness, poor electrical connection, damaged signal plate, faulty starter motor, or issues with the starting system circuit or battery.
Wrap Up
If you’re experiencing issues with your vehicle such as poor starting or a weak battery, the P1336 fault code may be the culprit. This code is often caused by a faulty crankshaft position sensor, open or shorted sensor harness, poor electrical connection, damaged signal plate, or a faulty starter motor. To fix the issue, visually inspect the wiring harness and connectors for any damage, and check for broken, bent, pushed out, or corroded connector pins.
