The automobile fault code P1335 indicates a problem with the Crankshaft Position Sensor.
This can be identified by the Engine Light being ON or the Service Engine Soon Warning Light. The possible causes include a faulty sensor, open or shorted sensor harness, poor electrical connection, damaged signal plate, faulty starter motor, issues with the starting system circuit, or a deadweak battery.
To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion.
Additionally, look for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0.
To interpret the fault code, check the “Possible Causes” mentioned above and perform the necessary inspections and repairs.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Uncover The Telltale Signs: Symptoms Of Fault Code P1335 Revealed!
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1335 fault code.
- The symptoms of the automobile fault code P1335 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P1335?
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
The automobile fault code P1335 can be caused by a faulty crankshaft position sensor, open or shorted CKP sensor harness, poor electrical connection in the CKP sensor circuit, damaged signal plate, faulty starter motor, issues with the starting system circuit, or a deadweak battery.
- The fault code P1335 can be caused by a faulty Crankshaft Position Sensor, an open or shorted CKP Sensor harness, a poor electrical connection in the CKP Sensor circuit, a damaged signal plate, a faulty starter motor, issues with the starting system circuit, or a dead or weak battery.
Fixing Code P1335: Simple Steps To Resolve The Issue
To fix the p1335 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code P1335, follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P1335 – Cost And Complexity Unveiled!
The automobile fault code P1335 can be diagnosed and fixed within an estimated repair time of 1.0 hour.
The cost of the repair will depend on the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.
P1335 Fault Code: Understanding The Causes And Solutions
The P1335 fault code refers to a problem with the Crankshaft Position Sensor (CKP) in the engine. This sensor is responsible for recording the speed at which the crankshaft is spinning. It provides crucial information to the Engine Control Module (ECM) for controlling ignition and fuel injection.
The sensor system consists of a rotating part, usually a disc, and a static part, which is the actual sensor. When the engine is running, the teeth on the rotating part cause the gap with the sensor to change.
This change in gap alters the magnetic field near the sensor, resulting in a change in voltage from the sensor. The P1335 code indicates that there is an issue with the crankshaft position sensor, which may affect the engine’s performance and fuel efficiency.
It is important to address this problem promptly to avoid further damage to the engine.
FAQ
If you’re seeing the engine light on or the service engine soon warning light, the fault code P1335 could be the culprit. This code is often caused by a faulty crankshaft position sensor, an open or shorted CKP sensor harness, poor electrical connection in the CKP sensor circuit, a damaged signal plate, a faulty starter motor, issues with the starting system circuit, or a dead or weak battery. To fix this issue, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.
If you’re dealing with the P1335 fault code and your engine light is on, it’s time to take action. The culprit could be a faulty crankshaft position sensor, an open or shorted CKP sensor harness, or a poor electrical connection in the CKP sensor circuit. Other potential causes include a damaged signal plate, a faulty starter motor, issues with the starting system circuit, or a dead or weak battery. To fix the problem, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken, bent, pushed out, or corroded pins. Don’t forget to check the other possible causes as well.
If you’re dealing with the P1335 fault code and your engine light is on, there are a few things you should check. Start by inspecting the wiring harness and connectors for any visual damage. Look out for broken, bent, pushed out, or corroded pins on the connectors. Additionally, make sure to examine the crankshaft position sensor, signal plate, starter motor, starting system circuit, and battery. By thoroughly checking these components and connector’s pins, you’ll be on your way to resolving the issue.
Wrap Up
If your engine light is on and you’re dealing with a P1335 fault code, it’s likely due to a faulty crankshaft position sensor or issues with the sensor’s circuit. To fix this, visually inspect the wiring harness and connectors for any damage.
Check for broken, bent, pushed out, or corroded pins on the connectors. Don’t forget to also check the starter motor and the starting system circuit, as well as the battery.
