OBD code P0882 indicates a fault in the Transmission Control Relay circuit.
Symptoms include the Engine Light being ON.
This code is commonly caused by a faulty Transmission Control Relay or related wiring issues.
It is important to address promptly to prevent potential transmission problems.
A possible fix involves inspecting the relay, wiring harness, and connectors for any damage or poor connections.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the p0882 OBD Code
The vehicle may experience issues with the TCM power input signal circuit.
- Symptoms: Engine Light ON.
- Possible harsh shifting from the transmission.
- Vehicle may go into limp mode, limiting speed and acceleration.
- Transmission may not shift gears properly.
Causes of the p0882 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible reasons for fault code P0882 include issues with the transmission control module power input signal.
- P0882 can be caused by a Faulty Transmission Control Relay.
- A Transmission Control Relay harness that is open or shorted.
- A Transmission Control Relay circuit with poor electrical connection.
Fixing Error Code p0882 Step By Step
Repair the transmission control module power input signal circuit to address fault code P0882.
- To fix OBDII code P0882, first, review the possible causes related to the transmission control module (TCM) power input signal low.
- Visually inspect the wiring harness and connectors for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- Test the voltage at the TCM power input circuit to ensure it is within specifications.
- Replace the TCM if necessary.
- Perform any required module resets or software updates to clear the fault code and ensure proper operation.
Cost Of Fixing p0882 Fault Code
Diagnosing and repairing fault code P0882 typically involves inspecting and testing the transmission control module.
The cost to diagnose and fix OBD code P0882 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
Costs depend on labor rates, shop fees, and the complexity of the issue.
Details of the p0882 OBD Code
P0882 code indicates a low voltage condition in the transmission control module power input signal.
OBD code P0882 means Transmission Control Module (TCM) Power Input Signal Low.
This code is triggered when the TCM detects that the voltage signal from the power input circuit is lower than the specified range.
The TCM monitors this signal to ensure proper power supply for its operation.
When the voltage falls below the threshold, it sets the P0882 code to indicate the issue with the power input signal.
This code is related to the power supply system of the TCM in the vehicle.
Mechanic’s Tech Notes
Code P0882 relates to the Transmission Control Module Power Input Signal Low.
To diagnose and fix OBDII code P0882, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.
Address any issues found during the inspection to resolve the P0882 code.
FAQ
OBD code P0882 indicates a fault with the Transmission Control Relay. Check relay, harness, and connections for issues. Inspect for damage or corrosion.
Common symptoms of OBD code P0882 include the Engine Light ON, caused by a faulty Transmission Control Relay or related wiring issues. Inspect and repair as needed.
Diagnose and fix OBD code P0882 by checking the Transmission Control Relay and its wiring for faults like open circuits or poor connections.

Wrap Up
If your transmission control module detects OBDII code p0882, you may experience issues with the transmission shifting erratically, stalling, or going into limp mode.
This code is commonly caused by a faulty transmission control module power input signal, damaged wiring, or a weak battery.
To address OBDII code p0882, start by checking the wiring harness for any visible damage or corrosion.
Test the connectors for a secure fit and proper voltage supply.
If no issues are found, consider replacing the transmission control module to resolve the problem effectively.