The automobile fault code P0860 indicates a problem with the Gear Shift Control Module ‘A’. This can cause the Engine Light to turn on or the Service Engine Soon Warning Light to illuminate. The possible causes include a faulty module, an open or shorted harness, or a poor electrical connection in the module circuit.
To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this problem is estimated to be around 1.0 hour.
It is important to address this issue promptly to prevent further damage to the vehicle.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
P0860: Unveiling The Symptoms Of This Mysterious Automobile Fault Code
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0860 fault code.
- The symptoms of the automobile fault code P0860 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unveiling The Culprits: What Causes Fault Code P0860?
The automobile fault code p0860 can be caused by a faulty Gear Shift Control Module ‘A’, an open or shorted harness, or a poor electrical connection in the circuit.
- The fault code P0860 can be caused by the following: a faulty Gear Shift Control Module ‘A’, an open or shorted harness for the Gear Shift Control Module ‘A’, and a poor electrical connection in the circuit for the Gear Shift Control Module ‘A’.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Fixing Code P0860: Simple Steps To Resolve The Issue
To fix the p0860 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p0860, start by checking the possible causes mentioned above.
- Then, visually inspect the wiring harness and connectors for any damage.
- Look for broken, bent, pushed out, or corroded pins on the connectors.
- This fix should take approximately 1.0 hour.
Cracking The Code: P0860 Fixing Cost And Complexity Unveiled!
The factors influencing the diagnosis and fixing cost of the automobile fault code p0860 are the estimated repair time and the hourly rate charged by auto repair shops.
The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.
These factors will determine the overall cost of diagnosing and fixing the p0860 fault code.
P0860: Transmission Fluid Pressure Sensor/Switch Circuit Malfunction Explained
The P0860 fault code indicates a problem with the communication circuit between the Engine Control Module (ECM) and the Gear Shift Control Module.
The ECM is responsible for monitoring the Gear Shift Control Module, and when it detects an issue in communication, it triggers the OBDII code. This fault code specifically refers to the communication circuit of Gear Shift Control Module ‘A’. When this fault code is present, it means that there is a disruption in the communication between the ECM and the Gear Shift Control Module.
This can lead to various issues, such as improper shifting of gears or difficulty in changing gears. It is important to address this problem promptly to ensure smooth and efficient operation of the transmission system.
A professional diagnostic scan and inspection of the communication circuit will be necessary to identify the exact cause of the issue and determine the appropriate fix.
FAQ
If you see the engine light or service engine soon warning light on, it could be due to the automobile fault code P0860. This code is often caused by a faulty gear shift control module ‘A’, an open or shorted harness, or a poor electrical connection in the gear shift control module ‘A’ circuit. To fix this issue, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look for broken, bent, pushed out, or corroded pins in the connectors.
To fix the issue of the Engine Light being ON or the Service Engine Soon Warning Light, start by checking the possible causes. Then, visually inspect the wiring harness and connectors related to the Gear Shift Control Module ‘A’. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This thorough inspection will help identify and resolve any issues with the wiring harness and connectors.
When troubleshooting an engine light or service engine soon warning light, it’s important to check for damaged components and corroded connector pins. These issues can cause a faulty gear shift control module ‘A’, an open or shorted harness, or a poor electrical connection in the circuit. To fix the problem, visually inspect the wiring harness and connectors, paying close attention to any signs of damage. Look for broken, bent, pushed out, or corroded pins on the connectors.
Wrap Up
If your engine light is on and you’re seeing the P0860 fault code, it could be due to a faulty Gear Shift Control Module ‘A’, an open or shorted harness, or a poor electrical connection in the circuit.
To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded pins on the connectors.
